Eaton B-Line series beam clamps, 1500 lb, Steel, Safety factor of 5, setscrew included, Beam clamp, 1/2"-13 thread/rod size, 1/2”-13 screw size, 7/8” flange width, Electro-plated zinc
Manufacturer Resources
Product Specs
- Beam Flange Width:
- .875 in
- Certifications:
- cULus Listed
- Load Capacity:
- 1500 lb
- Product Height:
- 2.5625 in
- Product Length Depth:
- 2.5 in
- Product Weight:
- 1.33 lb
- Product Width:
- .467 in
- Set Screw Size:
- 1/2”-13
- Special Features:
- Safety factor of 5, setscrew included
- Thread Rod Size:
- 1/2"-13
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
- Product Material:
- Steel
B-LINE B308ZN – Frequently Asked Questions
1) What size threaded rod does the B-Line B308ZN beam clamp take?
The B308ZN takes 1/2 inch-13 threaded rod. The setscrew that locks it to the beam is also 1/2 inch-13 and comes with the clamp, so you supply the rod and the hanger below it, nothing else on the clamp itself.
2) Is this beam clamp listed for electrical support work?
The B308ZN is cULus Listed, which is what an inspector looks for when the clamp is carrying conduit or cable support in a commercial building. It is a steel clamp with an electro-plated zinc finish.
3) Can I use a zinc-plated beam clamp outdoors or in a wet area?
Electro-plated zinc over steel is a dry, indoor-protected finish. For a parking deck, rooftop, cooling tower or any washdown or corrosive area, specify a hot-dip galvanized or stainless beam clamp instead. Indoors, in conditioned or normal mechanical spaces, the zinc plating is what most conduit and pipe support runs use.
4) Do I need to drill or weld the steel to hang rod from a beam?
No. A beam clamp like the B308ZN grips the flange and is locked with the included 1/2 inch-13 setscrew, so nothing gets drilled, welded or coated-through. That is why it is the standard way to pick up conduit and pipe hangers off structural steel in an existing building.
5) How much room does the B308ZN need around the beam?
The clamp body measures 2.5625 x 2.5 x .467 inches and weighs 1.33 lb. It is a compact single-jaw clamp, so it works where flanges are tight against deck or adjacent runs, but check the 2.5625 inch dimension against your clearance above the flange before you order a case.
How fast can I get the B-LINE B308ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B308ZN come with a warranty?
Absolutely. The B-LINE B308ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B308ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B308ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.