B-Line Eaton series CT hinged cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanized steel, Surface mount, 1P or 3P, Two over lapping doors

Yes. The B-Line Eaton series CT hinged cover enclosure carries a Type 3R rating, which is the rating for outdoor use against rain, sleet and falling dirt. It is galvanized steel with ANSI 61 gray paint over 12 gauge steel, and it is UL listed. Type 3R is not washdown or dust-tight, so if the location sees hose-down or heavy airborne dust you want a 4 or 4X enclosure instead.

It is built for single phase or three phase current transformer installations, so it suits either service arrangement. Confirm the utility's CT cabinet requirements for your area, since most power companies specify the cabinet detail on their service standard.

Surface mount. The B-Line CT hinged cover cabinet hangs on the face of the wall, so the full 14 inch depth projects into the room or off the exterior wall. If your drawing calls for a flush or semi-flush recessed CT enclosure, this is not the right unit.

The two overlapping door arrangement splits a 48 inch wide opening into two leaves, so each door swings in about half the space a single 48 inch door would need, and the overlap gives the utility a point to seal the cabinet closed. It also makes the cover manageable to open on a 220 lb, 12 gauge steel box that is hung on a wall.

The catalog number is 484814 DDHRTCT 1N from Eaton's B-Line series. The number reads out the box: 48 high, 48 wide, 14 deep, double door hinged raintight CT cabinet.

12 gauge is the heavier end of enclosure steel and is what most utilities call for on CT cabinets of this size. On this unit the 12 gauge body is galvanized steel finished in ANSI 61 gray paint, giving it a painted coating over a zinc coated base for outdoor 3R service.

ANSI 61 gray is the standard light gray used across most commercial switchgear, panelboards and control enclosures, so this cabinet will sit in line with a typical gear lineup without repainting.