You may also like
B-Line Eaton series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint finish, Galvanized steel, Surface mount, 1P or 3P, Two over lapping door
Model: BLN-424211 RTCT
Eaton B-Line series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint finish, Galvanized steel, Surface mount, 1P or 3P, Two over lapping doors
B-LINE
$9,057.91
B-Line Eaton series CT hinged cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanized steel, Surface mount, 1P or 3P, Two over lapping doors
Model: BLN-484814 DDHRTCT 1N
Eaton B-Line series CT hinged cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanized steel, Surface mount, 1P or 3P, Two over lapping doors
B-LINE
$19,664.74
B-Line Eaton series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanized steel, Surface mount, 1P or 3P, Lift off cover
Model: BLN-484811 RTCT
Eaton B-Line series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanized steel, Surface mount, 1P or 3P, Lift off cover
B-LINE
$10,133.40
B-Line Eaton series CT hinged cover, 3R, 12 gauge steel, ANSI 61 gray paint finish, Galvanize steel, Surface mount, 1P or 3P, Two over lapping doors
Model: BLN-484814 DDHRTCT
Eaton B-Line series CT hinged cover, 3R, 12 gauge steel, ANSI 61 gray paint finish, Galvanize steel, Surface mount, 1P or 3P, Two over lapping doors
B-LINE
$18,632.81
Eaton B-Line series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanize steel, Surface mount, 1P or 3P, Two over lapping doors
Manufacturer Resources
Product Specs
- Certifications:
- UL
- Degree Of Protection:
- 3R
- Enclosure Material:
- 12 gauge steel
- Mounting Method:
- Surface mount
- Phase:
- Single phase / Three phase
- Product Height:
- 36 in
- Product Length Depth:
- 14 in
- Product Weight:
- 250 lb
- Product Width:
- 48 in
- Special Features:
- Two over lapping doors
- Department:
- Electrical
- Product Finish:
- ANSI 61 gray paint
- Product Material:
- Galvanized steel
B-LINE 364814 RTCT – Frequently Asked Questions
1) What size opening does the Eaton B-Line 364814 RTCT CT cabinet need, and how much does it weigh?
The 364814 RTCT current transformer enclosure measures 36 in high, 48 in wide and 14 in deep, and it weighs 250 lb. Plan the wall and the fasteners around that weight, and plan on more than one person or a lift to set it. It is a surface mount enclosure, so the full depth stands proud of the wall.
2) Can this B-Line CT cabinet be installed outdoors?
Yes. The 364814 RTCT carries a 3R degree of protection, which is the rating utilities normally accept for outdoor, rain-exposed metering and CT cabinets. The body is galvanized steel with ANSI 61 gray paint over it, which is what holds up on an exterior wall.
3) Is this cabinet UL listed for a utility metering install?
UL is the certification carried on the 364814 RTCT. Most serving utilities also require the CT cabinet to appear on their own approved equipment list, so check the local utility's metering standard against the model number before you set it.
4) Does the 364814 RTCT work for both single phase and three phase services?
It is built for 1P or 3P current transformer installations, so the same enclosure covers a single phase or a three phase service. The CTs, mounting bar and wiring are provided per the utility's requirements, not with the box.
5) What is a lift off cover CT cabinet and how does it differ from a hinged door enclosure?
A lift off cover means the front panel comes completely away from the enclosure rather than swinging on hinges, which gives clear, unobstructed access to the CTs and bus in a tight equipment space. On the 364814 RTCT the front is two overlapping doors, so you can pull one section at a time on a 48 in wide box instead of wrestling a single full-width panel. A hinged design is easier if you open the cabinet often; a lift off is standard where the utility seals the cover and access is rare.
6) Is 12 gauge steel heavy enough for a utility CT enclosure?
Yes. 12 gauge is the heavier end of enclosure sheet steel and is what most utility metering standards call for on CT cabinets, as opposed to the 14 or 16 gauge used on general purpose boxes. The 364814 RTCT is 12 gauge steel over a galvanized steel base, finished in ANSI 61 gray.
7) Will the ANSI 61 gray finish match the switchgear already on site?
ANSI 61 gray is the standard light gray used across most switchgear, panelboards and metering equipment, so the 364814 RTCT lines up with an existing lineup finished to the same spec. That matters on multi-family and commercial service walls where a facility wants everything reading the same color.
How fast can I get the B-LINE 364814 RTCT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 364814 RTCT come with a warranty?
Absolutely. The B-LINE 364814 RTCT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 364814 RTCT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 364814 RTCT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.