You may also like
B-Line Eaton series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanize steel, Surface mount, 1P or 3P, Two over lapping doors
Model: BLN-364814 RTCT
Eaton B-Line series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanize steel, Surface mount, 1P or 3P, Two over lapping doors
B-LINE
$12,866.96
B-Line Eaton series CT hinged cover, 3R, 12 gauge steel, ANSI 61 gray paint finish, Galvanize steel, Surface mount, 1P or 3P, Two over lapping doors
Model: BLN-484814 DDHRTCT
Eaton B-Line series CT hinged cover, 3R, 12 gauge steel, ANSI 61 gray paint finish, Galvanize steel, Surface mount, 1P or 3P, Two over lapping doors
B-LINE
$18,632.81
B-Line Eaton series CT hinged cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanized steel, Surface mount, 1P or 3P, Two over lapping doors
Model: BLN-484814 DDHRTCT 1N
Eaton B-Line series CT hinged cover, 3R, 12 gauge steel, ANSI 61 gray paint, Galvanized steel, Surface mount, 1P or 3P, Two over lapping doors
B-LINE
$19,664.74
B-Line Eaton series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint finish, Galvanized steel, Surface mount, 1P or 3P, Lift off cover
Model: BLN-363611 RTCT
Eaton B-Line series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint finish, Galvanized steel, Surface mount, 1P or 3P, Lift off cover
B-LINE
$5,267.73
Eaton B-Line series CT lift off cover, 3R, 12 gauge steel, ANSI 61 gray paint finish, Galvanized steel, Surface mount, 1P or 3P, Two over lapping doors
Manufacturer Resources
Product Specs
- Certifications:
- UL
- Degree Of Protection:
- 3R
- Enclosure Material:
- 12 gauge steel
- Mounting Method:
- Surface mount
- Phase:
- Single phase / Three phase
- Product Height:
- 42 in
- Product Length Depth:
- 11 in
- Product Weight:
- 195 lb
- Product Width:
- 42 in
- Special Features:
- Two over lapping doors
- Department:
- Electrical
- Product Finish:
- ANSI 61 gray paint
- Product Material:
- Galvanized steel
B-LINE 424211 RTCT – Frequently Asked Questions
1) Can the B-Line 424211 RTCT CT cabinet be installed outdoors?
Yes. The 424211 RTCT carries a Type 3R rating, which covers outdoor use against falling rain, sleet and snow. It is not a washdown or hosedown enclosure, so keep it off surfaces that get pressure washed. The ANSI 61 gray paint over galvanized steel is the standard utility exterior treatment.
2) What are the outside dimensions of the 424211 RTCT current transformer cabinet?
It measures 42 inches high by 42 inches wide with an 11 inch depth. Plan the wall space and any required working clearance in front of the doors around that 42 x 42 face, and remember the two overlapping doors need room to swing clear.
3) How heavy is this B-Line CT cabinet, and what does that mean for mounting it?
195 pounds empty. That is a two-person lift at minimum, and it is a surface mount enclosure, so the wall or structure behind it has to carry the full load plus the CTs and conductors inside. On masonry use through-bolts or heavy expansion anchors; on a stud wall you want blocking or a strut backing frame rather than drywall anchors.
4) Is this CT cabinet UL listed for a utility service installation?
The 424211 RTCT is UL listed. Utilities generally also have their own approved equipment list for CT cabinets, so confirm the model against your serving utility's spec sheet before setting it.
5) Is the 424211 RTCT good for both single phase and three phase metering?
Yes, it is rated for 1P or 3P service, so the same cabinet works for a single phase residential or light commercial CT installation and for a three phase commercial service. The interior is sized to take the CTs the utility specifies for either arrangement.
6) What does the lift off cover with two overlapping doors get me over a hinged single door cabinet?
A lift off cover comes completely away from the box, which gives you a clear open 42 by 42 opening to pull and land large service conductors instead of working around a swinging door. The two overlapping doors let the utility seal one section for metering access while the rest stays closed. Hinged single door cabinets are easier for frequent access but harder to wire initially on a large service.
7) How do I make sure I get the right B-Line CT cabinet when I reorder?
Order by the model number 424211 RTCT, Eaton B-Line series. The number carries the size and configuration, so quoting it avoids ending up with a different depth or a hinged door version that the utility will not accept as a match to what is already on the building.
How fast can I get the B-LINE 424211 RTCT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 424211 RTCT come with a warranty?
Absolutely. The B-LINE 424211 RTCT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 424211 RTCT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 424211 RTCT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.