Eaton B-Line series fastener hardware and accessories, Anchor is a two-part assembly consisting , Carbon steel ,1⁄4" x 3", Combo round head bolt is provided,Toggle Bolt
Manufacturer Resources
Product Specs
- Application:
- Anchor is a two-part assembly consisting
- Certifications:
- UL Listed
- Product Diameter:
- .25 in
- Product Height:
- 3 in
- Product Weight:
- .065 lb
- Special Features:
- Combo round head bolt is provided
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Toggle Bolt
- Product Details:
- Toggle Bolt
- Product Material:
- Carbon steel
B-LINE ATB-25-300 – Frequently Asked Questions
1) Does the B-Line ATB-25-300 toggle bolt come with the bolt, or do I order that separately?
Both parts come together. The ATB-25-300 is a two-part assembly, the spring-wing toggle plus a combo round head bolt, so nothing else is needed to make the anchor up. You still supply the drill bit and, if your fixture needs one, a washer.
2) Is this B-Line toggle bolt UL Listed for electrical support work?
The ATB-25-300 toggle bolt is UL Listed. That matters on electrical jobs where the inspector wants the anchoring hardware supporting boxes, strut, or fixtures to carry a listing rather than being generic hardware out of a bin.
3) Can I use a toggle bolt like the B-Line ATB-25-300 in solid concrete?
No. A toggle bolt is a hollow-wall anchor. The wings have to open into an air space behind the material, so it works in drywall, hollow block, and hollow metal deck or panel, not solid concrete or solid masonry. For solid concrete you want a wedge or sleeve anchor instead.
4) Is the B-Line ATB-25-300 toggle bolt suitable for damp or outdoor use?
It is carbon steel, so plan on interior, dry locations. Carbon steel toggles will corrode in wet, exterior, or washdown areas unless they are protected; for those conditions spec a stainless anchor.
5) What drive does the head on this 1/4 inch B-Line toggle bolt take?
It ships with a combo round head bolt, so the head takes either a slotted or a Phillips driver. Handy overhead, where you are holding the toggle from dropping with one hand and can use whichever bit is already in the gun.
6) Can I remove and reuse the ATB-25-300 toggle bolt later?
Not really. Back the bolt out and the toggle wing drops into the wall cavity and is gone. If the fixture is likely to come down and go back up, plan on a fresh anchor each time, or use a threaded anchor type that stays captive in the wall.
How fast can I get the B-LINE ATB-25-300 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE ATB-25-300 come with a warranty?
Absolutely. The B-LINE ATB-25-300 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE ATB-25-300?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE ATB-25-300 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.