B-Line Eaton series fiberglass enclosures, Smooth brushed, Stainless steel, Fiberglass enclosures, Fits 36" X 30" enclosures, Fiberglass accessories

The AWF3630SP swing panel is built for 36 inch by 30 inch enclosures, so it drops into that enclosure size. The panel itself measures 33 in height, 27 in width and 33 in length/depth, which is why it clears the interior of a 36 x 30 box rather than a smaller one. If your enclosure is a different size, you need the matching panel for that size instead.

Stainless steel, with a smooth brushed finish. For a wash-down, coastal or chemical area where a painted steel panel would rust, that matters more than anything else on the spec line, and it pairs with fiberglass enclosures used in the same environments.

It is the interior mounting surface, not part of the enclosure shell. Components, terminal blocks, breakers and controls get bolted to the panel, then the panel goes into the box, so you can lay out and wire the assembly outside the enclosure. The AWF3630SP is that panel for a 36 x 30 fiberglass enclosure, in brushed stainless.

Order Eaton B-Line AWF3630SP. It is a single configuration, so there are no finish or size options to specify, the panel comes in brushed stainless steel as built.

About 26.479 lb. That is manageable for one person on the bench, but inside a wall-mounted 36 x 30 enclosure most electricians will want a second set of hands to hold it while the mounting hardware is started, since stainless at that size is awkward to balance overhead.