B-Line Eaton series ground mounted panel enclosure, 62" height, 12" length, 48" width, 4X, Hinged cover, 4XSFD3PT enclosure, Ground mount, Large doub

That's what the 4X rating is for. The B-Line 624812-4XSFD3PT is built in 304 stainless steel with a seamless poured in-place gasket, so it's rated NEMA 4X against hose-directed water, windblown dust and corrosion. UL 50 listed. The 304 stainless and #4 brushed finish are the reason it goes in food plants, wastewater sites and salt-air exteriors rather than a painted steel box.

62 inches high, 48 inches wide and 12 inches deep. The 12 inch depth is the number to check first: deep panels, large breakers or back-of-door mounted devices can run out of room in a 12 inch box, so confirm your panel's depth plus wiring bend space before you commit. The 48 inch width across a double door opening gives good access to a wide backpan.

It's a ground mounted unit, supplied with ground mount legs, so it stands on its own base rather than hanging on a wall. Plan on a pad or level structural surface and anchor through the legs. If your installation is a wall or strut mount, this is the wrong configuration and you want a wall mount 4X enclosure instead.

The large double door uses a 3-point latching handle, which pulls the door tight against the gasket at top, center and bottom, and the handle carries a key lock padlock provision. So you can padlock it closed for an unattended outdoor or utility-yard installation without adding hardware.

386.7 pounds empty. That's a rigging job, not a two-man carry: plan on a pallet jack, forklift or lifting lugs to get it to the pad, and do it before any gear goes inside. The 12 gauge body is part of why it's that heavy.

For a 48 inch wide opening, yes. A single door that wide is awkward to swing in a tight equipment room and needs deep clearance in front; the double door splits the swing, so you can open half of it to reach one section. The 3-point handle keeps sealing pressure even across the full 62 inch height, which is what keeps a 4X rating honest on a door that tall.

Order it as Eaton B-Line 624812-4XSFD3PT. The number reads out as the size and type: 62 high, 48 wide, 12 deep, 4X rating, stainless, double door, 3-point latch. Useful when you're matching an existing bank of enclosures on a site and need the identical body.

The enclosure is 12 gauge 304 stainless with hinged double doors. 12 gauge is the heavier end of the range for enclosures this size and resists the oil-canning and door sag you get on lighter 14 or 16 gauge bodies over a 62 inch door height.

Country of origin is US. Order the interior separately: the enclosure is supplied as the 4XSFD3PT body with hinged double doors, gasket, 3-point handle and ground mount legs. Panels, backpans, subpanel mounting kits and terminal kits are specified on top of the enclosure. Confirm your subpanel is sized for the 62 x 48 opening and fits within the 12 inch depth.