B-Line Eaton series ground mounted panel enclosure, 62" height, 18" length, 48" width, 4X, Hinged cover, 4XSFD3PT enclosure, Ground mount, Large doub

That is what the 4X rating is for. The 624818-4XSFD3PT is built from 304 stainless steel with a NEMA 4X rating, so it is intended for hosedown, windblown dust and rain, and corrosive environments. Sealing comes from a seamless poured in-place gasket rather than a cut-and-glued gasket, which is where outdoor enclosures usually start leaking. Finish is a #4 brushed stainless.

62 inches high, 48 inches wide, and 18 inches deep. The 62 inch height is the box itself; ground mount legs are part of the assembly, so plan your pad and conduit stub-ups with the legs raising the enclosure body above grade.

No. The 4XSFD3PT is configured as a ground mount enclosure with ground mount legs, not a wall mount box. If your install is against a building wall or a rack, you need a wall mount or free standing self supporting version instead.

It uses a large double door design with a hinged cover and a 3-point latching handle, which pulls the door tight against the gasket at top, center and bottom. The handle includes a key lock padlock provision, so you can secure it with a padlock or key it for restricted access on a utility or municipal site.

438.3 lb empty. That is a machine lift, not a two-man carry, and the weight comes from 12 gauge stainless construction. Budget for a forklift or crane pick and a pad rated for the enclosure plus whatever gear you are installing inside it.

It carries UL 50, the standard covering enclosures for electrical equipment. Pair that with the NEMA 4X rating when you submit it for a wet or corrosive outdoor location.

Painted carbon steel 4 rated boxes handle rain and washdown but not corrosion; once the coating is scratched at a conduit entry it starts rusting. The 4XSFD3PT is 304 stainless with a 4X rating, which adds corrosion resistance for wastewater plants, food processing yards, chemical areas and coastal sites. If corrosion is not a factor and you want a lighter, cheaper box, a painted 4 rated enclosure does the job. For strong chlorides, 316 stainless is the step above 304.

The 4XSFD3PT is supplied as the 62 x 48 x 18 stainless enclosure with hinged double doors, 3-point latching handle and ground mount legs. Interior panels, rails, terminal kits and any conduit hubs or drain/breather fittings are separate items you order to suit the gear you are installing. With 18 inches of depth you have room for a deep panel build.

Country of origin is the US, which matters on public works and federally funded jobs with domestic sourcing language. The submittal facts to carry over are 304 stainless, 12 gauge, NEMA 4X, and UL 50.