B-Line Eaton series ground mounted panel enclosure, 74" height, 12" length, 60" width, 4X, Hinged cover, 4XSFD3PT enclosure, Ground mount, Large doub

That is exactly what the 4X rating covers. The 746012-4XSFD3PT is built from 304 stainless steel with a NEMA 4X rating, so it is rated against hosedown, windblown dust and rain, and corrosion, which is why it shows up in food processing, wastewater plants and coastal sites. The seal is a seamless poured in-place gasket rather than a cut-and-glued strip, so there is no joint at the corners to weep. Wall material is 12 gauge.

Height is 74 inches, width 60 inches, and depth 12 inches. It is a ground mounted cabinet, so plan on a 60 inch wide by 12 inch deep footprint against the pad, plus swing room out front for a pair of large doors. At 74 inches tall on ground mount legs, overall standing height is above the 74 inch box itself, so check headroom under any canopy or pipe rack.

Floor standing. The mounting method is ground, and it ships with ground mount legs, so it bolts to a pad or housekeeping curb rather than hanging on a wall. If your install is a wall or strut mount, this is the wrong configuration and you want a wall mount 4X enclosure instead.

The double doors use a 3-point latching handle, which pulls the door tight at top, center and bottom for even gasket compression on a tall 74 inch opening. The handle has a key lock and padlock provision, so you can use the key or hang a plant padlock on it for lockout purposes.

510.5 lb empty. That is a rigging job, not a two-man carry. Plan on a forklift or a pick to get it off the truck and onto the pad, and confirm the pad and any anchors are sized for that load before the electrical gear goes in and adds to it.

The exterior is a #4 brushed stainless finish, the standard directional satin grain used on food and pharma equipment, so it blends with other 304 stainless cabinets and machine guarding rather than a painted grey box. Exact part to order is 746012-4XSFD3PT.