B-Line Eaton series ground mounted panel enclosure, 74" height, 12" length, 72" width, 4X, Hinged cover, 4XSFD enclosure, Ground mount, Large double

That is what the 4X rating covers. The Eaton B-Line 747212-4XSFD is built from 304 stainless steel with a seamless poured in-place gasket, so it is rated NEMA 4X for hosedown, windblown dust and rain, and corrosion resistance. Coastal salt air and food-plant washdown are the usual reasons people specify 304 over painted carbon steel. It is UL 50 listed.

74 inches high, 72 inches wide, and 12 inches deep. That is a floor-standing, large double door cabinet, so plan wall clearance for two doors swinging open across a 72 inch span plus the working clearance your install requires.

It is a ground mounted enclosure and ships with ground mount legs. It is meant to be set and anchored on a concrete pad or equivalent flat base, not hung on a wall. If your install is wall mounted, this is the wrong configuration and you want a wall mount 4X enclosure instead.

577.5 lb empty. That is well past a two-man lift, so plan on a forklift, telehandler, or crane at the pad, plus rigging. Add the weight of the panel, gear, and any subpanel you install before sizing the lift.

Yes, there is padlock provision on the hinged doors, and the doors close on stainless steel door clamps that pull them tight against the gasket. For utility or municipal sites where an access log matters, the padlock hasp lets you use your own keyed-alike or combination lock rather than a supplied key.

12 gauge 304 stainless throughout the body. That is the heavier end of the enclosure range and is why the cabinet comes in at 577.5 lb, but it also means the walls take drilling and cutting for conduit hubs without oil-canning.

The 747212 gives you 12 inches of inside depth to work with, which suits panelboards, terminal blocks, PLC racks, and control gear laid out flat on a subpanel across the 72 inch width. Deep breakers, large drives, or anything requiring rear wireway behind the panel will not fit in 12 inches. Measure your deepest component plus door-mounted devices before committing.

Eaton B-Line part number 747212-4XSFD. The number reads out of the dimensions: 74 high, 72 wide, 12 deep, 4XSFD for the NEMA 4X stainless free-standing double door configuration.

No. The cabinet is 304 stainless with a #4 brushed finish, which is the mill finish, not a coating. There is nothing to repaint or touch up. Keep the surface clean of iron particles from nearby grinding or cutting, since embedded carbon steel is the usual cause of what looks like rust on stainless.

Yes, country of origin on the 747212-4XSFD is the United States, which matters if your project carries domestic sourcing language for public works or federally funded work.