B-Line Eaton series ground mounted panel enclosure,72" height,24" length,60" width, 4X,Hinged cover,4XSFSDDA3PT enclosure,Ground mount,Large double do

That is exactly what the 4X rating is for. The Eaton B-Line 726024-4XSFSDDA3PT is built from 304 stainless steel with a seamless poured in-place gasket, so it is rated NEMA 4X against hosedown, windblown dust and corrosion. Good fit for food plants, car washes, wastewater sites and shoreline installations where painted carbon steel would rust at the seams.

Ground mount only. The 726024-4XSFSDDA3PT is a free-standing floor enclosure with no mounting provisions, so it is meant to be set and anchored on a concrete pad or a floor stand, not hung on a wall. If you need a wall-hung 4X stainless box, order a wall-mount series instead.

Both doors are hinged and secured by a 3-point latching handle, which pulls the door tight against the gasket at top, middle and bottom. The handle carries a key lock with padlock provision, so you can key it or hang your own padlock for a substation yard, pump house or other unattended location.

It carries UL 508A, the standard for industrial control panels, so it is the right shell for a UL-labeled control assembly. Combined with the 4X rating and 304 stainless body, it suits process control and machine panels in wet or corrosive plant areas.

With a 60 inch wide opening, the large double door style gives you full-width access to one continuous back area, which is what you want for long busbar runs, wide drives, or a single large subpanel. Two single-door boxes split your interior with a wall and double your conduit runs. The trade-off is swing space: two leaves need clear room in front, and this one is 664.2 lb so it is not getting repositioned once it is anchored.

None. Like most 4X stainless free-standing enclosures it comes sealed with no mounting provisions or factory openings, so all conduit entries are field-cut. Use watertight hubs or 4X-rated fittings and seal every penetration, otherwise the 4X rating is void at that hole. Bottom entry through the pad is the common approach on a ground-mounted 24 inch deep body.

Unpainted stainless with a #4 brushed finish, so you get the standard grey satin mill look rather than a coated surface. Nothing to chip or chalk outdoors, and it wipes down for sanitary areas.

Country of origin is the United States. For municipal, utility and federal work with domestic-content requirements, that is the sourcing answer on this Eaton B-Line enclosure, model 4XSFSDDA3PT.