B-Line Eaton series ground mounted panel enclosure,72" height,36" length,60" width, 4X,Hinged cover,4XSFSDDA3PT enclosure,Ground mount,Large double do

It carries a NEMA 4X rating and is built from 304 stainless steel with a seamless poured in-place gasket, so it is intended for wet, washdown, and corrosion-prone locations such as food plants, water treatment, and exterior yards. The 4X rating is what separates it from a plain 12 or 3R painted steel enclosure, which will not hold up to hose-down or chemical exposure.

The B-Line 726036 free-standing enclosure measures 72 inches height, 60 inches width, and 36 inches depth. The model number reads the same way: 72-60-36. Plan floor space and door swing for a 60 inch wide double-door front before you set the pad.

No. The 4XSFSDDA3PT is supplied with no mounting provisions inside, so a back panel, swing-out panel, or DIN rail kit has to be ordered separately and sized to the 72 x 60 enclosure. Budget for that panel when you price the job, because there is nothing inside to land components on out of the box.

Ground mount only. It is a free-standing floor enclosure and there are no wall mounting provisions, so it needs a level pad or floor stand with anchoring, not a wall. At 778.1 lb empty, rigging and a concrete or steel base are part of the install.

It is UL 508A listed, which is the standard panel shops build industrial control panels to. Note that the listing applies to the enclosure itself; the finished assembly still has to be built and labeled per 508A by the shop.

The doors are hinged and secured with a 3-point latching handle, with a key lock and padlock provision on the handle. That gives you a positive seal top, middle, and bottom against the gasket, plus a lockout point for facilities that require the panel secured.

Body and doors are 12 gauge 304 stainless, finished #4 brushed. That is a heavy wall for a free-standing enclosure and it is why the unit runs 778.1 lb empty, so factor lifting equipment into the set.

This is a large double door configuration across the 60 inch width. Two doors cut the swing radius roughly in half compared to one 60 inch door, which matters in tight aisles, and it gives you full-width access to a back panel when both are open.

The enclosure is 304 stainless, which handles general washdown, weather, and most food and beverage duty. In salt spray or heavy chloride exposure, 316 stainless is the grade normally specified instead, so confirm the environment against the 304 construction before you spec this one.

Country of origin is the United States. For government, utility, and institutional work with domestic sourcing requirements, that is the detail the procurement file usually needs against the model number 726036-4XSFSDDA3PT.