B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$615.30
B-Line Eaton series imperial cable tray and ladder, 4" Height, 19.692" Length, 24" Width, Series 2-5 vertical inside bend, Aluminum, 30° Angle, 24" Ra

B-Line Eaton series imperial cable tray and ladder, 4" Height, 19.692" Length, 24" Width, Series 2-5 vertical inside bend, Aluminum, 30° Angle, 24" Ra

(No reviews yet) Write a Review

Model: 4A-24-30VI24
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$615.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 19.692" Length, 24" Width, Series 2-5 vertical inside bend, Aluminum, 30° Angle, 24" Radius

Manufacturer Resources

Product Specs

Angle:
30°
Certifications:
CE
Product Height:
4 in
Product Length Depth:
19.692 in
Product Weight:
6.062 lb
Product Width:
24 in
Radius:
24 in
Department:
Electrical
Product Type:
Series 2-5 vertical inside bend
Product Details:
Series 2-5 vertical inside bend
Product Material:
Aluminum

B-LINE 4A-24-30VI24 – Frequently Asked Questions

1) What does the Eaton B-Line 4A-24-30VI24 vertical inside bend do in a cable tray run?
It is a 30 degree vertical inside bend for Eaton B-Line Series 2-5 aluminum cable tray, used where a straight run has to change elevation and the tray turns upward into the bend (inside of the angle). It carries a 4 inch side rail height and a 24 inch tray width, with a 24 inch bend radius. Use an outside bend fitting instead when the tray turns the opposite direction over an obstruction.
2) How much room do I need to allow in the ceiling for a 30 degree inside bend with a 24 inch radius?
Plan on the fitting occupying 19.692 inches of run length, measured along the tray, with a 24 inch bend radius sweeping the cable through the elevation change. Lay that 19.692 inch dimension out from the end of your last straight section before you set your trapeze hangers, because the support point after the bend has to land on straight tray, not on the fitting itself.
3) Why does the bend radius matter on a cable tray fitting?
The 24 inch radius on this fitting sets how gently the cable is bent as the tray changes elevation. Large power and fiber cables have a minimum bend radius of their own, and a tray fitting with a tighter radius than the cable allows will damage the conductors or the jacket. Check the cable manufacturer's minimum bend radius against the 24 inch figure before you commit; B-Line Series 2-5 fittings are also made in other radii if you need a wider sweep.
4) Is the 4A-24-30VI24 aluminum or steel, and where can it be used?
Aluminum. That makes it lighter to handle overhead on a 24 inch wide run (the fitting weighs 6.062 lb) and gives better corrosion performance than plain steel in damp, coastal or chemically aggressive areas. For a run that has to be steel or hot dip galvanized for load or fire reasons, this is not the right fitting.
5) Does the vertical bend come with splice plates and hardware?
The 4A-24-30VI24 is catalogued and supplied as the bend fitting itself, described only as a Series 2-5 vertical inside bend. Splice plates, bolts and any hanger or trapeze steel are separate line items on a B-Line tray order, so count two splice connections per fitting into your takeoff.
6) What is the exact part number to order for a 24 inch wide, 30 degree inside vertical bend in B-Line Series 2-5 aluminum tray?
Order Eaton B-Line 4A-24-30VI24. Reading the number: 4A is the 4 inch aluminum rail, 24 is the tray width, 30VI is the 30 degree vertical inside bend, and the trailing 24 is the bend radius.
7) Does this cable tray bend carry any certification for a European or export project?
It is CE marked. If your specification calls for a different listing or mark on the tray system, confirm that against the submittal before release.
How fast can I get the B-LINE 4A-24-30VI24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-24-30VI24 come with a warranty?
Absolutely. The B-LINE 4A-24-30VI24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-24-30VI24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-24-30VI24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!