B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$414.70
B-Line Eaton series imperial cable tray and ladder, 6" Height, 14.692" Length, 6" Width, Series 2-5 vertical inside bend, Aluminum, 30° Angle, 12" Rad

B-Line Eaton series imperial cable tray and ladder, 6" Height, 14.692" Length, 6" Width, Series 2-5 vertical inside bend, Aluminum, 30° Angle, 12" Rad

(No reviews yet) Write a Review

Model: 6A-06-30VI12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$414.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 14.692" Length, 6" Width, Series 2-5 vertical inside bend, Aluminum, 30° Angle, 12" Radius

Manufacturer Resources

Product Specs

Angle:
30°
Certifications:
CE
Product Height:
6 in
Product Length Depth:
14.692 in
Product Weight:
4.9 lb
Product Width:
6 in
Radius:
12 in
Department:
Electrical
Product Type:
Series 2-5 vertical inside bend
Product Details:
Series 2-5 vertical inside bend
Product Material:
Aluminum

B-LINE 6A-06-30VI12 – Frequently Asked Questions

1) What does a 30 degree vertical inside bend do in a cable tray run?
A vertical inside bend carries the tray run up or down while keeping the cables on the inside of the turn. The Eaton B-Line 6A-06-30VI12 makes a 30 degree change of elevation on a 12 inch radius, so it is the fitting you drop in where a ladder run has to climb over an obstruction or step down to a lower elevation without breaking the run. The 12 inch radius sets the bend of the cables through the turn, so match it to the minimum bend radius of the largest cable in the tray.
2) How much length does this vertical bend take out of my tray run?
The fitting measures 14.692 inches along its length, so plan that much of the run between the ends of the adjoining straight sections. On a takeoff, subtract it from the straight tray footage rather than adding it on top, or you will come up long at the far end.
3) Is this cable tray bend aluminum or steel, and does that matter for the rest of the run?
Aluminum. Keep the whole run in the same material: mixing an aluminum fitting into a galvanized or stainless steel run creates a dissimilar metal joint at the splice plates, and the splice hardware and grounding for the run are sized to the material. Aluminum tray is the common pick where weight matters and for exterior or corrosive areas.
4) What part number do I order for a 6 inch aluminum 30 degree inside bend on a 12 inch radius?
Eaton B-Line part number 6A-06-30VI12. Reading the number: 6A is the 6 inch aluminum series, 06 the width, 30VI the 30 degree vertical inside bend, and 12 the bend radius. Change the angle or radius and the suffix changes with it.
5) Do splice plates come with this cable tray bend?
The 6A-06-30VI12 ships as the bend section only. Splice plates and their hardware are ordered separately, and you need a set at each end where the fitting meets a straight run, so two sets per bend. Match the splice plate to the Series 2-5 aluminum rail it is joining.
6) How much does the B-Line 6A-06-30VI12 bend weigh for hanging and support calculations?
4.9 lb for the fitting itself. That is dead load to add at the bend when you size the trapeze or hanger spacing, on top of the cable fill weight through the turn. Support the fitting on both sides of the bend rather than cantilevering it off one straight section.
7) Does this Eaton B-Line tray fitting carry any certification?
It carries a CE marking. That is the only certification held on record for the 6A-06-30VI12 vertical inside bend.
How fast can I get the B-LINE 6A-06-30VI12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-06-30VI12 come with a warranty?
Absolutely. The B-LINE 6A-06-30VI12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-06-30VI12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-06-30VI12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!