You may also like
B-Line Eaton series imperial cable tray and ladder, 6" Height, 35.677" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" R
Model: BLN-6A-24-60VO36
Eaton B-Line series imperial cable tray and ladder, 6" Height, 35.677" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" Radius
B-LINE
$1,573.96
B-Line Eaton series imperial cable tray and ladder, 6" Height, 35.677" Length, 18" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" R
Model: BLN-6A-18-60VO36
Eaton B-Line series imperial cable tray and ladder, 6" Height, 35.677" Length, 18" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" Radius
B-LINE
$1,489.09
B-Line Eaton series imperial cable tray and ladder, 6" Height, 35.677" Length, 6" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" Ra
Model: BLN-6A-06-60VO36
Eaton B-Line series imperial cable tray and ladder, 6" Height, 35.677" Length, 6" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" Radius
B-LINE
$1,346.34
B-Line Eaton series imperial cable tray and ladder, 4" Height, 35.677" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" R
Model: BLN-4A-24-60VO36
Eaton B-Line series imperial cable tray and ladder, 4" Height, 35.677" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" Radius
B-LINE
$1,371.41
B-Line Eaton series imperial cable tray and ladder, 4" Height, 35.677" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" R
Model: BLN-4A-12-60VO36
Eaton B-Line series imperial cable tray and ladder, 4" Height, 35.677" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" Radius
B-LINE
$1,211.33
Eaton B-Line series imperial cable tray and ladder, 6" Height, 35.677" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 36" Radius
Manufacturer Resources
Product Specs
- Angle:
- 60°
- Certifications:
- CSA
- Product Height:
- 6 in
- Product Length Depth:
- 35.677 in
- Product Weight:
- 15.1 lb
- Product Width:
- 30 in
- Radius:
- 36 in
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical outside bend
- Product Details:
- Series 2-5 vertical outside bend
- Product Material:
- Aluminum
B-LINE 6A-30-60VO36 – Frequently Asked Questions
1) How much space do I need to allow for this 36 inch radius bend?
Allow about 35.677 inches of run length for the fitting itself, measured along its depth, plus the 36 inch radius geometry of the 60 degree turn. Lay that out against your ceiling height and obstruction before you cut the adjoining straight sections.
2) What is the exact part number I should order for a 30 inch, 60 degree outside vertical bend on 36 inch radius?
Eaton B-Line part number 6A-30-60VO36. The number reads across as 6 inch rail height, aluminum, 30 inch width, 60 degree vertical outside bend, 36 inch radius, which is a useful check when you are matching a fitting to a tray schedule.
3) Can I use this as an inside bend if the tray drops instead of rises?
No. This is the outside bend version, where the tray rail curves away from the cable fill side. A drop in the run needs the vertical inside bend at the same 30 inch width, 6 inch height and 36 inch radius. Substituting one for the other puts the cable against the wrong side of the curve and breaks the run geometry.
4) What does a 60 degree vertical outside bend do in a cable tray run?
A vertical outside bend carries the tray run over an obstruction or up a change in elevation, with the fitting bending away from the tray's interior. The Eaton B-Line 6A-30-60VO36 turns the run through 60 degrees on a 36 inch radius, so cable bending radius is maintained through the transition instead of forcing a sharp break in the run.
5) Is this cable tray fitting approved for use in Canada?
The 6A-30-60VO36 vertical outside bend carries a CSA certification, which is the listing Canadian inspectors look for. No other agency listing is carried on it.
6) Why choose aluminum cable tray over steel for this kind of run?
Aluminum keeps the fitting light, this 30 inch wide bend weighs 15.1 lb, so a two-man crew can set it on a lift or overhead support without rigging. Aluminum also holds up in damp and corrosive environments. Where you need maximum load capacity or lower material cost on a long indoor run, steel tray is the usual alternative, but it will not mate with this aluminum Series 2-5 fitting.
7) Does this B-Line bend come with splice plates and hardware?
Order the splice plates and connection hardware separately. The 6A-30-60VO36 is the bend fitting itself, and each end of it needs a splice connection to the adjoining straight tray section, so budget two sets per fitting along with the hanger or trapeze support at the transition.
How fast can I get the B-LINE 6A-30-60VO36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-30-60VO36 come with a warranty?
Absolutely. The B-LINE 6A-30-60VO36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-30-60VO36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-30-60VO36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.