Eaton B-Line series imperial cable tray and ladder, 6" Height, 42" Length, 30" Width, Series 2-5 horizontal cross, Aluminum, 24" Radius
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Product Height:
- 6 in
- Product Length Depth:
- 42 in
- Product Weight:
- 55.9 lb
- Product Width:
- 30 in
- Radius:
- 24 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 horizontal cross
- Product Details:
- Series 2-5 horizontal cross
- Product Material:
- Aluminum
B-LINE 6A-30-HX24 – Frequently Asked Questions
1) What size cable tray does the B-Line 6A-30-HX24 horizontal cross fit?
The 6A-30-HX24 is built for 30 inch wide, 6 inch deep Series 2-5 aluminum tray. Width and rail height have to match the straight sections on all four legs, so it mates to 30 inch wide runs with 6 inch side rails, not 12, 18 or 24 inch tray.
2) How much room do I need to frame in a 30 inch B-Line horizontal cross?
Plan the opening around a 42 inch overall dimension with the 30 inch tray width and 6 inch rail depth. A 24 inch radius cross is a large footprint, so lay it out before hangers go in, and confirm all four approach runs land square on the same elevation.
3) Is this B-Line cable tray cross aluminum or steel, and will it hold up outdoors?
Aluminum. It's lighter than an equivalent steel fitting and doesn't rely on a coating for corrosion resistance, which is why aluminum tray is common in outdoor, wash-down and process areas. Keep the whole run in one material family so you are not mixing aluminum and steel at bolted splices.
4) When do I use a horizontal cross instead of a tee on a cable tray run?
A cross is for a true four-way intersection, where tray continues straight through and branches off both sides at the same elevation. If cable only branches one direction, a horizontal tee is the correct fitting and a cheaper, smaller footprint. For a change in elevation you want a vertical inside or outside bend, not this part.
5) Do splice plates come with the B-Line 6A-30-HX24 cross?
Order the cross as the fitting body. Each of the four connections to adjoining straight tray needs the matching Series 2-5 aluminum splice plate set and hardware, so count four sets per cross when you build the material list.
How fast can I get the B-LINE 6A-30-HX24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-30-HX24 come with a warranty?
Absolutely. The B-LINE 6A-30-HX24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-30-HX24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-30-HX24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.