Eaton B-Line series imperial cable tray and ladder, 4" Height, 42" Length, 30" Width, Series 2-5 horizontal cross, Aluminum, 24" Radius
Manufacturer Resources
Product Specs
- Certifications:
- CSA
- Product Height:
- 4 in
- Product Length Depth:
- 42 in
- Product Weight:
- 42.613 lb
- Product Width:
- 30 in
- Radius:
- 24 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 horizontal cross
- Product Details:
- Series 2-5 horizontal cross
- Product Material:
- Aluminum
- Product Length:
- 42 in
B-LINE 4A-30-HX24 – Frequently Asked Questions
1) What radius is the B-Line 4A-30-HX24 cross, and why does that matter for cable pulling?
It is a 24 inch radius fitting. The radius sets the bend the cables take through the intersection, so it has to be at least the minimum bending radius of the largest cable in the tray. Larger power and medium voltage cable typically drives the 24 inch choice; smaller radius fittings are used where only control or communication cable runs.
2) How much space do I need to lay out a 30 inch wide four-way cable tray intersection?
Plan for a 42 inch overall dimension on the fitting. With a 24 inch radius on a 30 inch tray, the cross extends well past the tray edge, so allow clearance from walls, beams, and ductwork at all four legs before you set your trapeze supports.
3) Is the B-Line 4A-30-HX24 cable tray cross aluminum or steel, and where should aluminum be used?
Aluminum. That is the usual pick where weight matters on long support spans or where the environment would rust plain steel, such as outdoor runs, parking structures, and damp process areas. If your spec calls for hot dip galvanized steel or stainless for a particular corrosive service, an aluminum fitting will not satisfy it.
4) Does the Eaton B-Line 4A-30-HX24 have any listings or certifications?
It carries CSA certification, which is what most Canadian and many cross-border institutional specs are looking for on cable tray fittings.
5) What is the exact part number to order this B-Line 30 inch aluminum four-way cable tray fitting?
Order Eaton B-Line part number 4A-30-HX24. The code reads as 4 inch aluminum, 30 inch width, horizontal cross, 24 inch radius, in the Series 2-5 family.
How fast can I get the B-LINE 4A-30-HX24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-30-HX24 come with a warranty?
Absolutely. The B-LINE 4A-30-HX24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-30-HX24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-30-HX24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.