B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,836.89
B-Line Eaton series imperial cable tray and ladder, 6" height, 47.17" length, 42" width, Series 2-5 vertical inside bend, 90°, 24" radius, Aluminum

B-Line Eaton series imperial cable tray and ladder, 6" height, 47.17" length, 42" width, Series 2-5 vertical inside bend, 90°, 24" radius, Aluminum

(No reviews yet) Write a Review

Model: 6A-42-90VI24
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,836.89
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" height, 47.17" length, 42" width, Series 2-5 vertical inside bend, 90°, 24" radius, Aluminum

Manufacturer Resources

Product Specs

Angle:
90°
Certifications:
CE
Product Height:
6 in
Product Length Depth:
47.17 in
Product Weight:
22.1 lb
Product Width:
42 in
Radius:
24 in
Department:
Electrical
Product Type:
Series 2-5 vertical inside bend
Product Details:
Series 2-5 vertical inside bend
Product Material:
Aluminum

B-LINE 6A-42-90VI24 – Frequently Asked Questions

1) What does a 90 degree vertical inside bend do in a cable tray run?
A vertical inside bend turns the tray run up or down through 90 degrees with the fitting's radius on the inside of the turn, so the cables stay supported around the change in elevation instead of bending over a cut edge. This Eaton B-Line fitting, model 6A-42-90VI24, is the Series 2-5 vertical inside bend at 90 degrees with a 24 inch radius. Use a vertical outside bend instead when the run turns the other way and the cables ride the outside of the curve.
2) Will the 6A-42-90VI24 bend match my 42 inch wide, 6 inch deep aluminum tray?
It is built for 42 inch width and 6 inch loading depth, which is the tray size it bolts to. The fitting is aluminum, so it pairs with an aluminum tray run rather than steel, and it is a Series 2-5 fitting. If your straight sections are a different width or a different rail height, this bend will not line up at the splice.
3) Why choose a 24 inch radius bend over a tighter one?
Radius is chosen off the cable, not the tray. Large power and fiber cables have a minimum bending radius, and a 24 inch radius fitting keeps the cable curve gentle enough for those runs. A tighter radius fitting saves space but can violate the cable manufacturer's bend limit. This bend is the 24 inch radius version at 90 degrees.
4) Is aluminum the right cable tray material for a damp or corrosive area?
This bend is aluminum, which is the usual pick where weight matters and where a plated or painted steel tray would corrode, since aluminum self-passivates. It is also non-magnetic. For heavy mechanical abuse or very high load spans, a steel tray system is the alternative. Keep the whole run in one material so the splices and bonding behave consistently.
5) What part number do I order for a 42 inch, 6 inch deep aluminum 90 degree vertical inside bend?
Order Eaton B-Line 6A-42-90VI24. The number reads out as 6 inch depth, aluminum, 42 inch width, 90 degree vertical inside bend, 24 inch radius, which is exactly the Series 2-5 fitting described here. Splice plates and hardware to join it to the straight sections are ordered separately.
6) How heavy is this cable tray bend for handling and hanging?
The fitting weighs 22.1 lb. Aluminum construction keeps it light enough for a two-man lift into position on a 42 inch wide run, and that dead weight plus cable fill is what your trapeze or wall supports on either side of the bend have to carry.
7) Does this Eaton B-Line tray bend carry any certification marking?
It is CE marked. That is the marking held on record for model 6A-42-90VI24.
How fast can I get the B-LINE 6A-42-90VI24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-42-90VI24 come with a warranty?
Absolutely. The B-LINE 6A-42-90VI24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-42-90VI24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-42-90VI24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!