B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,622.94
B-Line Eaton series imperial cable tray and ladder, 6" Height, 51.8125" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 48" Radius

B-Line Eaton series imperial cable tray and ladder, 6" Height, 51.8125" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 48" Radius

(No reviews yet) Write a Review

Model: 6A-36-45HB48
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,622.94
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 51.8125" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 48" Radius

Manufacturer Resources

Product Specs

Angle:
45°
Certifications:
CE
Product Height:
6 in
Product Length Depth:
51.8125 in
Product Weight:
18.9 lb
Product Width:
36 in
Radius:
48 in
Department:
Electrical
Product Type:
Series 2-5 horizontal bend
Product Details:
Series 2-5 horizontal bend
Product Material:
Aluminum

B-LINE 6A-36-45HB48 – Frequently Asked Questions

1) How much space do I need to lay out a 45 degree cable tray bend with a 48 inch radius?
Plan on roughly 51-13/16 inches of overall run length for this fitting, which is its stated length. It turns 45 degrees on a 48 inch inside radius, so the horizontal sweep is generous and needs clearance on the outside of the turn before your next straight section picks up.
2) Will this fitting work for a vertical rise or drop in the tray run?
No. This is a horizontal bend, meaning it turns the run left or right in plan at 45 degrees. For a change in elevation you need a vertical inside or outside bend instead, which is a different fitting even at the same 36 inch width and 6 inch depth.
3) Why choose a 48 inch radius bend instead of a tighter one for cable tray?
Bend radius is driven by the minimum bending radius of the cable you are pulling, not by the tray. A 48 inch radius gives large power and fiber runs a gentle sweep through the 45 degree turn, which keeps conductors from being over-bent at the fitting. If your cable spec allows a tighter turn, a shorter radius fitting takes up less ceiling space, but it has to be ordered as a different part.
4) Is this cable tray bend aluminum or steel, and does that matter for a corrosive area?
Aluminum. That matters on two counts: it is lighter to hang, and it holds up better than plain painted steel in damp or mildly corrosive environments without a galvanized or coated finish. The whole fitting weighs 18.9 lb even at 36 inches wide, which is why a two-man lift usually is not needed on an overhead hang.
5) Do I need extra supports at a 45 degree cable tray bend?
Yes, fittings are normally supported independently rather than cantilevered off the adjoining straight sections. With a 51-13/16 inch overall length and 18.9 lb of fitting weight before any cable load, the usual practice is a hanger near each end of the bend so the splice plates are not carrying the turn. Hangers and splice hardware are separate items from the fitting itself.
6) What part number do I quote for a 36 inch wide, 6 inch aluminum 45 degree horizontal bend?
Order Eaton B-Line 6A-36-45HB48. The number breaks down to 6 inch side rail, aluminum, 36 inch width, 45 degree horizontal bend, 48 inch radius, which is exactly what the spec calls out.
7) Does the B-Line 6A-36-45HB48 bend carry any certification marking?
It is CE marked. That is the certification stated for this aluminum Series 2-5 horizontal bend.
How fast can I get the B-LINE 6A-36-45HB48 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-36-45HB48 come with a warranty?
Absolutely. The B-LINE 6A-36-45HB48 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-36-45HB48?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-36-45HB48 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!