B-Line Eaton series JIC panel enclosure, 10" height, 6" length, 10" width, 12, Hinged cover, 12CHSC enclosure, Wall mount, Small single door, Externa

NEMA 12 is the right call for indoor use against falling dirt, circulating dust, lint and dripping or splashing non-corrosive liquids, and the 10106-12CHSC uses an oil-resistant gasket for exactly that kind of machine-tool environment. It is not a washdown or hosedown rating. If the box will see direct hose spray or outdoor weather, step up to a NEMA 4 or 4X enclosure instead.

It is a 10 x 10 x 6 inch box: 10 inch height, 10 inch width, and 6 inch depth. That 6 inch depth is what decides whether your DIN rail, contactors and wire bend radius fit, so check the tallest device you are mounting plus panel standoffs before you commit.

Yes, the 12CHSC box comes with panel mounting provisions built in, so a back panel can be installed for DIN rail or device mounting. The panel itself is a separate order item, not part of the enclosure.

It mounts to a wall on external mounting feet, so the box body stands off the surface. That keeps the mounting holes outside the sealed area, which is how the NEMA 12 seal is preserved, and it means you never drill the back of the box to hang it.

Body is 16 gauge carbon steel with a painted finish in ANSI 61 grey, which is the standard grey used across most industrial control enclosures, so it will read consistent alongside existing panels. Steel, not stainless, so keep it out of corrosive or wet locations.

Hinged, on a continuous piano hinge, with plated screws to clamp the door shut. A hinged cover means you are not juggling a loose lid at the top of a ladder, and the continuous hinge spreads the load evenly so the gasket seats consistently along the whole door.

JIC-style enclosures like the 12CHSC ship without knockouts so the seal is intact out of the box; you punch conduit openings where your run lands and use gasketed hubs or fittings to keep the NEMA 12 rating. The 16 gauge carbon steel body takes a standard punch.

9 pounds empty, so one person can hold it on the wall and start the fasteners without help. Add the weight of your back panel and devices when you pick anchors.