B-Line Eaton series meter s, 2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5,441.31
Image coming soon

B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Surface mount, 4 jaws,

(No reviews yet) Write a Review

Model: 214 MTB MS84

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5,441.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Surface mount, 4 jaws, 1 position, 1Ø/3W, Overhead and underground feed

Manufacturer Resources

Product Specs

Amperage Rating:
100A
Certifications:
UL
Compliances:
EUSERC Approved
Interrupt Rating:
10 kAIC
Product Height:
38 in
Product Length Depth:
4.63 in
Product Weight:
35 lb
Product Width:
12 in
Department:
Electrical
Product Finish:
ANSI 61 gray paint
Product Material:
Galvanized steel

B-LINE 214 MTB MS84 – Frequently Asked Questions

1) Can the B-Line 214 MTB MS84 meter socket be mounted outdoors?
Yes. The 214 MTB MS84 is built in a Type 3R enclosure, which is the rain-tight rating used for exterior wall-mounted service equipment. The shell is galvanized steel finished in ANSI 61 gray paint, and it is a surface mount unit, so it lands flat on the wall or meter pedestal backing rather than recessing into it.
2) Is this a ringless or ring-type meter socket, and does it matter which one the utility wants?
The 214 MTB MS84 is a ring-type socket, meaning the meter is retained by a sealing ring rather than by a ringless cover. It matters a great deal: utilities specify one or the other and will not set a meter in the wrong style. Confirm your serving utility's requirement before ordering, because a ringless spec needs a different socket entirely.
3) Will the 214 MTB MS84 work on a 120/240 V single phase residential service?
Yes, that is exactly what it is built for. It is a 4 jaw, 1 phase 3 wire socket with one meter position, which is the standard arrangement for a single 120/240 V single phase service. Three phase services need a different jaw count.
4) Can this meter socket be used on an overhead drop, or only underground service?
Both. The 214 MTB MS84 is built for overhead and underground feed, so the same unit works whether the service conductors come down from a mast or up from a lateral. That saves stocking two part numbers when a job has a mix of feeds.
5) What size service conductors will the lugs in this B-Line meter socket accept?
Both the line and load lugs take #6 through 250 MCM. That covers ordinary copper and aluminum service entrance sizes for a single family or small commercial service without needing adapters or pin terminals.
6) Does this Eaton B-Line meter socket meet EUSERC requirements for utility inspection?
It is EUSERC approved and UL listed. If you are working in a western US utility territory that enforces EUSERC drawings on service equipment, that approval is the box the inspector and the utility service planner are looking for.
7) How much wall space do I need for the 214 MTB MS84, and how heavy is it to hang?
Plan for 38 inches of height, 12 inches of width, and 4.63 inches of depth off the wall. It weighs 35 pounds, so it is a one-man hang on solid backing but awkward on a ladder alone. The depth figure is what to check against any siding trim, gas piping, or shutter that sits near the meter location.
8) What short circuit rating does this meter socket carry?
10 kAIC. That is the interrupting rating to compare against the available fault current your utility publishes at the service point. If the utility calculation comes back above 10 kA at that transformer, you need equipment with a higher rating instead.
9) Does the 214 MTB MS84 include a test block, or is that ordered separately?
The test block is part of the unit, not an add-on. That is what lets utility metering personnel test or bypass without pulling conductors, and some utilities require it on new service installations.
10) What is the exact part number for this B-Line meter socket so I can match a spec sheet?
The manufacturer part number is 214 MTB MS84, from the Eaton B-Line series. Quote that number when matching a utility drawing or replacing an existing unit, since the MS suffix and jaw configuration are what differentiate it from adjacent models in the family.
How fast can I get the B-LINE 214 MTB MS84 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 214 MTB MS84 come with a warranty?
Absolutely. The B-LINE 214 MTB MS84 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 214 MTB MS84?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 214 MTB MS84 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!