You may also like
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Surface mount, 4 jaws,
Model: BLN-214 MTB MS84
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Surface mount, 4 jaws, 1 position, 1Ø/3W, Overhead and...
B-LINE
$5,441.31
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Steel, Surface mount, 7 jaws, 1 position,
Model: BLN-215 MTBH
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Steel, Surface mount, 7 jaws, 1 position, 3Ø/4W, Overhead and underground feed
B-LINE
$9,758.11
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Side, 7 jaws, 3 poles,
Model: BLN-U224 MTBP
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Side, 7 jaws, 3 poles, 1 position, 3Ø/4W
B-LINE
$14,327.59
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Steel, Surface mount, 5 jaws, 1 position,
Model: BLN-214 MTBP
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Steel, Surface mount, 5 jaws, 1 position, 1Ø/3W, Overhead and underground feed
B-LINE
$8,758.96
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Steel, Surface mount, 4 jaws, 1 position,
Model: BLN-214 MTBH
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Steel, Surface mount, 4 jaws, 1 position, 1Ø/3W, Overhead and underground feed
B-LINE
$7,105.93
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Surface mount, 7 jaws, 1 position, 3Ø/4W, Overhead and underground feed
Manufacturer Resources
Product Specs
- Amperage Rating:
- 100A
- Certifications:
- UL
- Compliances:
- EUSERC Approved
- Interrupt Rating:
- 10 kAIC
- Product Height:
- 38 in
- Product Length Depth:
- 4.63 in
- Product Weight:
- 37 lb
- Product Width:
- 12 in
- Department:
- Electrical
- Product Finish:
- ANSI 61 gray paint
- Product Material:
- Galvanized steel
- Product Length:
- 4.63 in
B-LINE 215 MTB – Frequently Asked Questions
1) Can the B-Line 215 MTB meter socket be mounted outdoors?
Yes. The 215 MTB is built in a Type 3R enclosure, which is the rainproof rating used for outdoor service equipment, and the housing is galvanized steel finished in ANSI 61 gray paint. It surface mounts to the wall rather than flush mounting into it.
2) Is the 215 MTB meter socket single phase or three phase?
Three phase. The 215 MTB is a 7 jaw, 1 position socket wired for 3 phase, 4 wire service. A 4 jaw socket is what you would use for single phase 3 wire, so this is not a substitute for a residential single phase installation.
3) What size service conductors will the B-Line 215 MTB meter socket lugs take?
Both line and load lugs accept #6 through 250 MCM copper or aluminum conductor sizes, so it will land typical 200 A class service entrance cable without adapters.
4) Is the B-Line 215 MTB a ringless or ring type meter socket?
Ring type. The meter is secured with a sealing ring rather than a ringless cover, which is what many utilities specify. Check your serving utility's requirement before ordering, because ring and ringless are not interchangeable in the field.
5) Does the B-Line 215 MTB meet utility submittal requirements in the western states?
It is EUSERC Approved and UL listed, which is what most western utilities look for on a service equipment submittal. It also carries a 10 kAIC interrupt rating.
6) Will the 215 MTB work for an underground service lateral, or only overhead?
Either. The socket is built for both overhead and underground feed, so the same unit covers a weatherhead drop or a lateral coming up from below.
7) How much wall space do I need for the 215 MTB meter socket, and how heavy is it?
The enclosure measures 38 in high by 12 in wide with a 4.63 in depth, and it weighs 37 lb. Plan the mounting surface and backing accordingly, since it is a surface mounted unit.
8) Does the 215 MTB include a test block?
Yes, a test block is part of the unit, which lets the utility or a technician test or bypass the meter without pulling service conductors.
9) What part number do I order for this B-Line meter socket?
Order Eaton B-Line model 215 MTB. That is the manufacturer part number for the 7 jaw, ring type, 3R surface mount socket with test block.
How fast can I get the B-LINE 215 MTB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 215 MTB come with a warranty?
Absolutely. The B-LINE 215 MTB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 215 MTB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 215 MTB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.