B-Line SB86086S072SL Eaton series open frame racks, 67.375" height, 10.8125" length, 6" width, Aluminum, RCM rack mounted vertical cable manager, Direct pdu mounting, High density plastic finger, Silver powder coat

Plan for 6 inches of width beside the rack and 10.8125 inches of depth for the manager body. Because it is a rack mounted vertical manager with unrestricted front and rear cable routing, both sides of the channel are worked from the aisle, so keep a working clearance in front of and behind the rack rather than boxing it against a wall.

Yes. The SB86086S072SL is built for direct PDU mounting, so a vertical rack PDU attaches to the manager channel itself instead of consuming rack rail space. That keeps the power strip beside the equipment and the whips inside the same channel as the data cabling.

For a rack full of high port count switches, the vertical channel is what carries the bulk. This RCM manager uses high density plastic fingers running the full 67.375 inch height, so patch cords drop straight down the side of the frame instead of crossing the rack face. Horizontal managers still earn their place as 1U or 2U transitions at each patch panel, but they cannot carry the vertical bundle volume. Use both: verticals for the trunk, horizontals for the jog into each panel.

UL is the certification carried on the SB86086S072SL. That is the value on record for this part, so if your submittal calls for a UL recognized vertical manager it can be cited as such.

Body is aluminum with a silver powder coat, and the finger and trim components are black plastic. Next to a standard silver or clear anodized Eaton B-Line open frame rack it reads as a match; against a black rack it will not. Aluminum also keeps the unit at 14.9 pounds, so one person can hang it.

Both sides. The RCM channel allows unrestricted front and rear cable routing, so you can bring switch uplinks in from the rear and patch cords in from the front without pulling anything through a single face. That matters on a two-sided open frame install where rear equipment cabling has to reach the same vertical trunk.

Order it as B-Line SB86086S072SL. That single manufacturer part number covers the 67.375 inch high, 6 inch wide, 10.8125 inch deep silver aluminum RCM vertical manager with high density plastic fingers, so there is no separate height or finish suffix to specify.