You may also like
Eaton B-Line series open frame racks
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 96 IN
- Product Length Depth:
- 96 IN
- Product Weight:
- 124 LB
- Product Width:
- 23 IN
- Surface Finishing:
- Telco gray powder coat
- Department:
- Electrical
- Product Group:
- Racks & Frames
- Product Subgroup:
- Racks
- Product Type:
- Seiemic zone 4, network bay open duct rack
- Product Details:
- Seiemic zone 4, network bay open duct rack
- Product Style:
- Top channel style
- Product Material:
- Steel
- Product Length:
- 96 in
B-LINE SB5476096TG – Frequently Asked Questions
1) Is the B-Line SB5476096TG rack rated for seismic zone 4 installations?
Yes. The SB5476096TG is built as a seismic zone 4 network bay open duct rack, so it is the version to specify where a data room or central office falls in that zone rather than a standard non-seismic open frame rack. It is also UL Listed.
2) How much does the Eaton B-Line SB5476096TG rack weigh for handling and floor loading?
The rack weighs 124 lb empty, steel construction. That is a two-person lift to set upright, and the figure is before any equipment, ducting, or cable load is added when you calculate floor loading and seismic anchorage.
3) What is a top channel style rack and when would I use one instead of a plain two-post rack?
The SB5476096TG uses a top channel style, meaning the uprights are tied together at the top with a channel that carries overhead runway and duct support. That is what makes it a network bay open duct rack: you get an open frame for equipment access plus a structural top for cable duct and ladder rack attachment. A plain two-post rack with no top channel is the simpler choice where overhead runway is supported independently from the ceiling or wall.
4) Is the SB5476096TG an enclosed cabinet or an open frame rack?
Open frame. There are no side panels, no doors, and no rear enclosure, so equipment is accessible from all sides and airflow is unrestricted. If you need lockable physical security or containment, an enclosed cabinet is the product to look at instead.
5) What finish does the B-Line SB5476096TG come in, and will it match existing telecom racks?
Telco gray powder coat over steel, which is the standard finish on telecom and central office bay lineups, so it lines up visually with existing telco gray racking in the same room.
6) What is the exact part number to order this Eaton B-Line seismic bay rack?
Order it as B-Line SB5476096TG, part of the Eaton B-Line series open frame racks. That single manufacturer part number covers the 23 inch wide, 96 inch tall telco gray seismic zone 4 configuration.
How fast can I get the B-LINE SB5476096TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5476096TG come with a warranty?
Absolutely. The B-LINE SB5476096TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5476096TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5476096TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.