Eaton B-Line series panels and panel accessories, NEMA 12 rated, White polyester powder coated aluminum, JIC and small panels, Panels and panel accessories, Aluminum panel
Manufacturer Resources
Product Specs
- Certifications:
- CSA C22.2.
- Degree Of Protection:
- NEMA 12
- Product Category:
- Panels & panel accessories
- Product Height:
- 12.87 in
- Product Length Depth:
- 10.875 in
- Product Weight:
- 1.107 lb
- Product Width:
- 12 in
- Department:
- Electrical
- Product Group:
- Panels & Plates
- Product Subgroup:
- Panel Accessories
- Product Type:
- JIC & small panels
- Product Details:
- JIC & small panels
- Product Material:
- Aluminum
B-LINE AW1412AP – Frequently Asked Questions
1) What size is the Eaton B-Line AW1412AP aluminum back panel?
The AW1412AP panel measures 12.87 x 12 x 10.875 inches as published, and weighs 1.107 lb. Aluminum construction is what keeps the weight down, so one person can drop it into an enclosure and bolt it off without help.
2) Is the AW1412AP panel suitable for a NEMA 12 industrial enclosure?
Yes. The AW1412AP is rated NEMA 12, so it is intended for indoor enclosures protecting against dust, falling dirt, and dripping non-corrosive liquids. It is a JIC and small panel type, the sub-panel that mounts inside the box and carries your DIN rail, terminal blocks, and controls.
3) Is this a complete enclosure or just the inner mounting panel?
It is the panel only. The AW1412AP is a back panel accessory for JIC and small enclosures, so you still need the enclosure body, door, and the mounting studs or hardware that box uses to carry it.
4) Will an aluminum back panel corrode in a washdown or damp plant area?
The AW1412AP is aluminum with a white polyester powder coat, which resists the corrosion you would get from a bare steel panel in a humid plant. It is still a NEMA 12 rated part, meaning indoor dust and dripping liquid, not directed washdown or outdoor exposure. For hosedown duty you want a NEMA 4X enclosure and panel instead.
5) Does the Eaton B-Line AW1412AP carry a Canadian approval?
It is listed to CSA C22.2, which is the Canadian standard set a specifier or inspector will ask for on a control panel build north of the border.
6) What exact part number do I order for this B-Line white aluminum sub-panel?
Order Eaton B-Line model AW1412AP. That is the single model on this configuration, so there are no finish or size options to specify with it.
7) Why choose a white powder coated panel over an unpainted one?
The white polyester powder coat on the AW1412AP reflects light inside the enclosure, which makes wire colours and terminal markings easier to read when a tech has the door open in a dim plant area. It also gives a clean surface for label placement and keeps the aluminum from marking up hands and cuffs.
How fast can I get the B-LINE AW1412AP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE AW1412AP come with a warranty?
Absolutely. The B-LINE AW1412AP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE AW1412AP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE AW1412AP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.