B-Line Eaton series panels and panel accessories, White polyester powder coated, Aluminum, Panels and panel accessories, Fits 8" X 6" enclosures, JIC

The AW86AP is sized for 8 x 6 inch enclosures, the JIC and small panel style. The panel itself measures 6.87 in height, 4.87 in width and 4.875 in listed length/depth, so it sits inside the box on the mounting studs rather than matching the outside box dimensions. If your enclosure is a different size, you need the back panel matched to that box, not this one.

Aluminum, with a white polyester powder coat over it. That is the reason to pick it over a plain steel sub-panel in damp, coastal or washdown locations: the base metal doesn't rust if the coating gets scratched during drilling and tapping. Weight is .265 lb, so it is easy to pull and drill on the bench before mounting.

Yes, the AW86AP carries a UL Listing. That matters on jobs where the inspector wants the enclosure and its internal components to be listed rather than field-fabricated, and it is why spec writers call out a manufacturer's back panel instead of a cut piece of sheet stock.

It is the inner mounting plate. You drill and tap it for DIN rail, terminal blocks, relays, contactors or a small controller, then mount the loaded plate into the enclosure. The AW86AP is the plate only, so the enclosure, mounting hardware and anything you fasten to it are separate purchases.

Order Eaton B-Line model AW86AP. It is a single configuration, white polyester powder coated aluminum, sized for 8 x 6 inch JIC and small enclosures, so there is no finish or size option to specify.

Yes. Aluminum at this size takes a tapped hole easily and the .265 lb plate can be laid out on the bench. Keep in mind the white powder coat is a finish, not an insulator you can rely on, so bond the plate per your grounding detail if your panel design calls for it.