B-Line Eaton series panels and panel accessories, White powder coated, Steel, Panels and panel accessories, Fits 6" X 4" enclosures, JIC and small pan

Yes. The AW64P is a perforated back panel sized for 6" x 4" enclosures, including JIC and small panel boxes. The panel itself measures 6 in by 4 in, so it drops onto the mounting studs or brackets inside an enclosure of that nominal size rather than covering the full interior wall of a larger box. If your enclosure is a different footprint, you need the panel matched to that size.

It's 14 gauge steel, which is the usual weight for an industrial enclosure back panel and stiff enough to carry mounted terminal blocks, relays, small contactors, or DIN rail without flexing. Total panel weight is .266 lb.

The AW64P carries a UL Listed marking. That matters for inspectors on commercial and industrial control work where the enclosure and its internal panel both need to be recognized components.

A perforated panel like the AW64P comes pre-punched, so you can bolt components through existing holes instead of drilling and tapping a blank plate. That saves fabrication time on small control boxes but fixes your mounting locations to the hole pattern. A solid panel takes longer to prep and gives you placement anywhere. The AW64P is the medium perforated type.

Order Eaton B-Line model AW64P. That is the single model for the white powder coated 14 gauge perforated panel sized to 6" x 4" enclosures.

It ships white powder coated, so no field finishing is needed. The white face also makes wiring and component labeling easier to read inside a small box. Note that powder coat is an insulating layer, so if you need a bonded ground path through the panel you'll have to scrape the coating at the bonding point or use a paint-piercing washer.

The AW64P is the panel only. Mounting screws or studs are part of the enclosure's own panel-mounting provision, so check what your box came with and order screws separately if the enclosure did not include them.