B-Line SB214B15KTG Eaton series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, Runway wall support, Steel, Telco gray powder coat finish

The bracket measures 18 inches wide, 25 inches high, and 3 inches deep, so the 18 inch dimension is what sets how far the runway stands off the wall. Lay those numbers against your pathway drawing before you set anchors, since the 25 inch dimension governs how much clear wall you need for the mounting leg.

A wall bracket like the SB214B15KTG carries runway directly off a wall or structural surface, which is what you want when the runway runs along a perimeter or you have no structure overhead to hang from. Where runway crosses open floor space or a room center, an overhead drop or floor-supported stanchion is the better choice. Many equipment rooms use both: brackets along the walls, drops through the middle.

It is ASTM A36 structural steel with a telco gray powder coat, the standard grade and color for equipment room ironwork. The powder coat is a dry indoor finish, not a galvanized coating, so it suits conditioned telecom and data rooms rather than wet or exterior locations.

Each bracket weighs 10 pounds, light enough for a one-man set but heavy enough that you want the right anchor behind it. Wall anchors are not part of the bracket; pick your fasteners for the wall you are mounting to (concrete, CMU, or steel stud framing) and for the cable load the runway will carry.

SB214B15KTG is a single Eaton B-Line series runway shelf bracket, a wall-mounted runway support in telco gray. It is one bracket per part number, so count the number of support points along your run and order accordingly.