You may also like
B-Line Eaton series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, Runway wall support, ASTM A36 s
Model: BLN-SB214A24KTG
Eaton B-Line series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, Runway wall support, ASTM A36 structural steel, Telco gray powder coat finish
B-LINE
$352.83
B-Line SB214B15KTG Eaton series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, Runway wall support, Steel, Telco gray powder coat finish
Model: BLN-SB214B15KTG
Eaton B-Line series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, Runway wall support, Steel, Telco gray powder coat finish
B-LINE
$651.36
B-Line Eaton series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, ASTM A36 structural steel, Telc
Model: BLN-SB214A15KTG
Eaton B-Line series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, ASTM A36 structural steel, Telco gray powder coat
B-LINE
$315.50
B-Line Eaton series runway shelf bracket, Use to support cable runway from wall, Runway wall support, ASTM A36 structural steel, Yellow zinc
Model: BLN-SB214B24KYZ
Eaton B-Line series runway shelf bracket, Use to support cable runway from wall, Runway wall support, ASTM A36 structural steel, Yellow zinc
B-LINE
$670.03
B-Line Eaton series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, Runway wall support, Steel, Tel
Model: BLN-SB214A18KTG
Eaton B-Line series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, Runway wall support, Steel, Telco gray powder coat
B-LINE
$330.78
Eaton B-Line series runway shelf bracket, Use to support cable runway from wall, Sized for 1-1?2 and 2 inch stringers, Runway wall support, ASTM A36 structural steel, Telco gray powder coat
Manufacturer Resources
Product Specs
- Application:
- Use to support cable runway from wall
- Certifications:
- UL Listed
- Material Details:
- Telco gray powder coat ASTM A36 steel
- Product Height:
- 25 in
- Product Length Depth:
- 3 in
- Product Weight:
- 10.5 lb
- Product Width:
- 21 in
- Special Features:
- Sized for 1-1⁄2 & 2 inch stringers
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Runway wall support
- Product Details:
- Runway wall support
B-LINE SB214B18KTG – Frequently Asked Questions
1) How far off the wall does the B-Line SB214B18KTG runway bracket hold the cable runway?
The bracket measures 25 inches high, 21 inches wide and 3 inches deep, so the 21 inch dimension is what governs how far the runway sits from the wall face. Lay out your ladder rack centerline and any wall-mounted equipment with that projection in mind before drilling.
2) Do I need ceiling supports or threaded rod if I use runway wall brackets instead?
No. A shelf bracket like the SB214B18KTG carries the cable runway off the wall itself, which is the usual approach when you cannot reach structure overhead or want to keep the ceiling clear. Overhead kits with threaded rod and trapeze hangers are the alternative when the runway has to cross open floor space away from any wall.
3) What is the runway bracket made of, and will the finish match my existing B-Line ladder rack?
It is ASTM A36 structural steel with a telco gray powder coat, the same gray used across Eaton B-Line runway components, so it blends with existing telco gray ladder rack and stringers rather than standing out as a mismatched piece.
4) How much does one B-Line runway shelf bracket weigh for my wall anchor calculation?
Each bracket weighs 10.5 lb on its own. Add that to the runway and cable load when you size masonry anchors or pick a stud attachment, since the dead weight of the bracket itself is part of what the wall has to carry.
5) Is the SB214B18KTG a single bracket or a set for a full runway run?
The SB214B18KTG is one runway wall support bracket, ordered by that model number. A run of cable runway needs brackets spaced along its length, so count your spans and order the quantity to match rather than expecting a multi-piece kit.
How fast can I get the B-LINE SB214B18KTG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB214B18KTG come with a warranty?
Absolutely. The B-LINE SB214B18KTG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB214B18KTG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB214B18KTG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.