You may also like
B-Line B155SS6 Eaton series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg, Thickness 1/4 in, Hole size 9/16 in diameter, Stainless steel type 316
Model: BLN-B155SS6
Eaton B-Line series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg, Thickness 1/4 in, Hole size 9/16 in diameter, Stainless...
B-LINE
$283.03
B-Line B155YZN Eaton series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg, Thickness 1/4 in, Hole size 9/16 in diameter, Yellow zinc chromate
Model: BLN-B155YZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg, Thickness 1/4 in, Hole size 9/16 in diameter, Yellow zinc...
B-LINE
$89.76
$54.29
B-Line B155HDG Eaton series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg, Thickness 1/4 in, Hole size 9/16 in diameter, Hot-dipped galvanized
Model: BLN-B155HDG
Eaton B-Line series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg, Thickness 1/4 in, Hole size 9/16 in diameter, Hot-dipped...
B-LINE
$97.80
$63.97
B-Line B155PAZN Eaton series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg | Pre assembled, Thickness 1/4 in, Hole size 9/16 in diameter, Electro-plated
Model: BLN-B155PAZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg | Pre assembled, Thickness 1/4 in, Hole size 9/16 in...
B-LINE
$103.56
$71.73
B-Line Eaton series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg, Thickness 1
Model: BLN-B155GRN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg, Thickness 1/4 in, Hole size 9/16 in diameter, DURA GREEN
B-LINE
$4,953.09
Eaton B-Line series strut fittings and accessories, 1.62" Height, 4.48" Length, 2.35" Width, .63lbs, Steel, Two hole closed angle, 45 deg, Thickness 1/4 in, Hole size 9/16 in diameter, Stainless steel type 304
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 1.62 in
- Product Length Depth:
- 4.48 in
- Product Weight:
- .63 lb
- Product Width:
- 2.35 in
- Special Features:
- Hole size 9/16 in diameter
- Department:
- Electrical
- Product Type:
- Two hole closed angle, 45 deg
- Product Finish:
- Stainless steel type 304
- Product Details:
- Two hole closed angle, 45 deg
- Product Material:
- Steel
B-LINE B155SS4 – Frequently Asked Questions
1) Will 1/2 inch strut bolts fit the holes in the B155SS4 angle?
The holes are 9/16 inch in diameter, which is the standard clearance hole for 1/2 inch strut nuts and hardware. Anything larger than 1/2 inch diameter will not pass through.
2) Is the B-Line B155SS4 bracket suitable for outdoor or washdown installations?
It is made in type 304 stainless steel, which is the grade normally specified for outdoor, damp, and food or pharma washdown areas where plain or electro-galvanized fittings would rust. For chloride-heavy environments such as coastal or pool chemical rooms, type 316 is the usual step up.
3) How thick is the steel on the B155SS4 strut angle fitting?
Quarter inch material. That 1/4 inch thickness is the heavier of the common strut fitting gauges and is what lets a two hole connection carry real load at the joint rather than deflect under it.
4) Does the B155SS4 fitting come with the strut nuts and bolts needed to install it?
No. The B155SS4 is the bracket only. You supply the channel nuts, bolts, and washers, sized to the 9/16 inch holes, and in 304 stainless if you want the corrosion resistance of the fitting carried through the whole connection.
5) Should I use a 45 degree closed angle or an adjustable angle fitting for a strut brace?
Use the B155SS4 closed angle when the geometry is a fixed 45 degrees, typically a diagonal kicker brace or a mitered corner. It holds that angle rigidly with no chance of a hinged joint working loose. If the angle on your opening varies or you are fitting to an existing irregular structure, an adjustable or swivel-type fitting is the right call instead.
6) What is the part number to order the B-Line 45 degree stainless two hole angle?
Order it as B155SS4, an Eaton B-Line series strut fitting. The SS4 suffix is the 304 stainless version of the B155 angle.
How fast can I get the B-LINE B155SS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B155SS4 come with a warranty?
Absolutely. The B-LINE B155SS4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B155SS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B155SS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.