You may also like
B-Line B141SS6 Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 316
Model: BLN-B141SS6
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 316
B-LINE
$209.77
$189.99
B-Line Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Th
Model: BLN-B141HDG
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Hot-dipped galvanized
B-LINE
$4,220.30
B-Line Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in,
Model: BLN-B141GRN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in, DURA GREEN
B-LINE
$3,198.55
B-Line B141PAGRN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN
Model: BLN-B141PAGRN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN
B-LINE
$97.84
$55.98
B-Line B141PAZN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
Model: BLN-B141PAZN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
B-LINE
$97.39
$55.98
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 304
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- .23 in
- Product Length Depth:
- 5.37 in
- Product Weight:
- .55 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Panels & Plates
- Product Subgroup:
- Plates
- Product Type:
- Three hole splice plate,Pre assembled
- Product Finish:
- Stainless steel type 304
- Product Details:
- Three hole splice plate,Pre assembled
- Product Material:
- Steel
B-LINE B141SS4 – Frequently Asked Questions
1) What is the B-Line B141SS4 splice plate used for on a strut run?
The B141SS4 is a three hole splice plate used to join two lengths of strut channel end to end, carrying the bolted connection across the joint. It ships pre assembled, so the hardware comes with the plate rather than being ordered separately.
2) Is the B141SS4 splice plate stainless, and can it go outdoors or in a wash-down area?
It is stainless steel, type 304. That is the grade specifiers normally call out for exterior, damp, and wash-down runs where plain steel or electro-galvanized fittings would rust out. For heavy chloride exposure such as coastal or pool chemical rooms, buyers typically step up to a 316 fitting instead.
3) How thick is the B141SS4 splice plate?
Material thickness is 1/4 inch. That thickness matters twice: it sets how much stack-up you add at the joint, and it means your channel nuts and bolts have to be long enough to pass through both the plate and the strut lip.
4) What are the dimensions and weight of the B141SS4 three hole splice plate?
The plate measures .23 x 5.37 x 1.62 inches and weighs .55 lb. The 1.62 inch width is the figure to check first, since it has to sit flat against the face of the strut you are splicing.
5) Do I need to order bolts and channel nuts separately for the B141SS4?
No. The B141SS4 is supplied pre assembled, so the plate arrives with its hardware. Plan on one plate per splice, or two if you are plating both faces of the joint.
6) What part number should I give my distributor for the Eaton B-Line three hole stainless splice plate?
Order it as B141SS4 from Eaton B-Line. The SS4 suffix is the type 304 stainless version of the B141 plate.
How fast can I get the B-LINE B141SS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B141SS4 come with a warranty?
Absolutely. The B-LINE B141SS4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B141SS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B141SS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.