You may also like
B-Line B141ZN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in, Electro-plated
Model: BLN-B141ZN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in, Electro-plated
B-LINE
$75.62
$30.54
B-Line B141PAZN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
Model: BLN-B141PAZN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
B-LINE
$97.39
$55.98
B-Line B141PAGRN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN
Model: BLN-B141PAGRN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN
B-LINE
$97.84
$55.98
B-Line B141SS4 Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 304
Model: BLN-B141SS4
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 304
B-LINE
$137.45
$103.48
B-Line B141SS6 Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 316
Model: BLN-B141SS6
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 316
B-LINE
$209.77
$189.99
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in, DURA GREEN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- .23 in
- Product Length Depth:
- 5.37 in
- Product Weight:
- .55 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Panels & Plates
- Product Subgroup:
- Plates
- Product Type:
- Three hole splice plate
- Product Finish:
- DURA GREEN
- Product Details:
- Three hole splice plate
- Product Material:
- Steel
- Product Length:
- 5.37 in
B-LINE B141GRN – Frequently Asked Questions
1) What does the Eaton B-Line B141GRN three hole splice plate do in a strut run?
The B141GRN is a flat three hole splice plate used to join two lengths of strut end to end, or to tie a fitting flat against the strut face. It bolts through three holes on a 5.37 inch long by 1.62 inch wide steel plate, so the connection is made with strut nuts and bolts rather than welding or drilling on site.
2) How thick is the B-Line B141GRN splice plate, and will it sit flat against strut?
It is 1/4 inch steel, with an overall height of .23 inch, so it is a flat plate with no offset or bend. That means it lays directly on the face of the strut channel and the bolt heads or strut nuts carry the load in shear through the three holes. If you need to change direction or wrap a corner, a flat splice plate is the wrong part and you want an angle or corner gusset fitting instead.
3) What is DURA GREEN finish on B-Line strut fittings?
DURA GREEN is Eaton B-Line's green protective coating applied over the steel fitting. Order it when the rest of the strut run on the job is DURA GREEN so the hardware matches; if the existing channel and fittings are plain electro-galvanized or hot dip, the green plate will stand out visually even though it bolts up the same.
4) What part number do I order for the green three hole strut splice plate?
Order Eaton B-Line part number B141GRN. The GRN suffix is the DURA GREEN finish on the B141 three hole splice plate.
5) How much does one B-Line B141GRN splice plate weigh for a hanging load calculation?
Each plate weighs .55 lb. On a long overhead strut run with a splice every joint, that dead weight adds up quickly, so count your splices when you total the load on the anchors.
How fast can I get the B-LINE B141GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B141GRN come with a warranty?
Absolutely. The B-LINE B141GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B141GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B141GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.