B-Line B141PAGRN Eaton series ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$97.84
$55.98
B-Line B141PAGRN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN

B-Line B141PAGRN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN

(No reviews yet) Write a Review

Model: B141PAGRN
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$97.84
$55.98
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Material Gauge:
1/4"
Product Height:
.23 in
Product Length Depth:
5.37 in
Product Weight:
.55 lb
Product Width:
1.62 in
Department:
Electrical
Product Group:
Panels & Plates
Product Subgroup:
Plates
Product Type:
Three hole splice plate,Pre assembled
Product Finish:
DURA GREEN
Product Details:
Three hole splice plate,Pre assembled
Product Material:
Steel
Product Length:
5.37 in

B-LINE B141PAGRN – Frequently Asked Questions

1) What does the Eaton B-Line B141PAGRN three hole splice plate actually do on a strut run?
The B141PAGRN is a flat three hole splice plate used to join two lengths of strut channel end to end, or to tie a fitting to channel, by bolting through three holes in line. It ships pre assembled, so the hardware comes with it rather than being bought separately. The plate is steel, 1/4 inch thick, and measures 5.37 by 1.62 by .23 inches.
2) Does the B-Line B141PAGRN come with bolts and nuts, or do I order channel nuts separately?
The B141PAGRN is supplied pre assembled, meaning the plate comes with its hardware attached rather than as a bare plate. You still need the strut channel itself and any additional channel nuts for other connection points in the run.
3) What is DURA GREEN finish on B-Line strut fittings and where would I use it?
DURA GREEN is the finish on the B141PAGRN splice plate, applied over a steel body. It is the coated option in the B-Line strut fitting line rather than plain or electro-galvanized steel, so it is what people specify when the run needs more coating protection than bare steel. If your job was built with plain zinc strut fittings and you want the hardware to match visually, order the same fitting in that finish instead.
4) Is the B141PAGRN splice plate thick enough for a structural strut splice, or is it a light duty plate?
It is a 1/4 inch thick steel plate, which is the heavier of the common B-Line flat fitting gauges and is what gets used where the splice carries load rather than just aligning channel. Overall it weighs .55 lb. If the design on your drawing calls for a lighter formed plate, that is a different fitting number.
5) How much room does a B141PAGRN splice plate take up on the face of the strut?
Plan for a footprint of 5.37 by 1.62 inches with a .23 inch height off the channel face, plus the 1/4 inch plate stock. At 1.62 inches wide it sits within the face of standard 1-5/8 inch strut, so it will not overhang into an adjacent run or a wall surface.
6) What is the exact part number to order this Eaton B-Line green three hole splice plate?
Order it as B-Line B141PAGRN. That single number covers the pre assembled three hole splice plate in steel, 1/4 inch thickness, DURA GREEN finish. There are no size or finish options to pick under it.
7) Should I use a three hole splice plate or a longer flat plate to join strut?
A three hole splice plate like the B141PAGRN is for a straight in line joint where three fasteners are enough to carry the connection, and at 5.37 inches long it spans a short distance either side of the seam. If you need more fasteners in the joint or you are lapping further onto each channel, step up to a longer multi hole flat plate. For a corner or a change of direction, a flat plate is the wrong fitting entirely, use an angle fitting.
How fast can I get the B-LINE B141PAGRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B141PAGRN come with a warranty?
Absolutely. The B-LINE B141PAGRN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B141PAGRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B141PAGRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!