You may also like
B-Line Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in,
Model: BLN-B141GRN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in, DURA GREEN
B-LINE
$3,198.55
B-Line B141PAZN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
Model: BLN-B141PAZN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
B-LINE
$97.39
$55.98
B-Line B141PAGRN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN
Model: BLN-B141PAGRN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN
B-LINE
$97.84
$55.98
B-Line B141SS4 Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 304
Model: BLN-B141SS4
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 304
B-LINE
$137.45
$103.48
B-Line B141SS6 Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 316
Model: BLN-B141SS6
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Stainless steel type 316
B-LINE
$209.77
$189.99
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- .23 in
- Product Length Depth:
- 5.37 in
- Product Weight:
- .55 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Panels & Plates
- Product Subgroup:
- Plates
- Product Type:
- Three hole splice plate
- Product Finish:
- Electro-plated
- Product Details:
- Three hole splice plate
- Product Material:
- Steel
B-LINE B141ZN – Frequently Asked Questions
1) What is the Eaton B-Line B141ZN splice plate used for?
The B141ZN is a three hole splice plate for Eaton B-Line strut systems. It bolts across the joint between two pieces of strut channel to tie them end to end into a continuous run, or to stiffen a butt joint in a trapeze or rack build. It is a flat steel plate, 5.37 inches long by 1.62 inches wide, with a 1/4 inch material thickness.
2) Can I use the B141ZN electro-plated splice plate outdoors or in a wet area?
The B141ZN carries an electro-plated zinc finish over steel. That is an indoor, dry-location finish, the same class used on standard strut nuts and hardware, and it will corrode in weather, washdown, or coastal exposure. For outdoor runs, rooftops, or wet process areas, specify a hot-dip galvanized or stainless strut fitting instead.
3) Do bolts and strut nuts come with the B-Line B141ZN splice plate?
No. The B141ZN ships as the plate alone. You supply the channel nuts and hex bolts, typically 1/2 inch hardware for standard strut, one set per hole for all three holes to develop the joint.
4) What is the exact part number to order the B-Line three hole splice plate?
Order Eaton B-Line part number B141ZN. The ZN suffix designates the electro-plated zinc finish, so quoting the full number keeps you from receiving a galvanized or plain-finish version of the same plate.
5) How thick is the B141ZN plate where it sits against the strut face?
The plate stands .23 inches proud, which is the stated product height, over a 1/4 inch material thickness. Allow for that standoff when the splice sits against a wall, deck, or another fitting, and use bolts long enough to pass through the plate plus the channel nut engagement.
6) Does the B141ZN splice plate carry a UL listing or other certification?
Certifications are marked Not Applicable for the B141ZN. It is a mechanical strut fitting, so if your submittal calls for a listed or labeled component, this plate will not satisfy that line item.
How fast can I get the B-LINE B141ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B141ZN come with a warranty?
Absolutely. The B-LINE B141ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B141ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B141ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.