You may also like
B-Line Eaton series strut fittings and accessories, 3.5" Height, 3.5" Length, 1.62" Width, .70lbs, Steel, Offset size 3-1/2 in, Three hole z-support,
Model: BLN-B110GRN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 3.5" Length, 1.62" Width, .70lbs, Steel, Offset size 3-1/2 in, Three hole z-support, Thickness 1/4 in, DURA GREEN
B-LINE
$7,939.20
B-Line B110HDG Eaton series strut fittings and accessories, 3.5" Height, 3.5" Length, 1.62" Width, .70lbs, Steel, Offset size 3-1/2 in, Three hole z-support, Thickness 1/4 in, Hot-dipped galvanized
Model: BLN-B110HDG
Eaton B-Line series strut fittings and accessories, 3.5" Height, 3.5" Length, 1.62" Width, .70lbs, Steel, Offset size 3-1/2 in, Three hole z-support, Thickness 1/4 in, Hot-dipped galvanized
B-LINE
$126.49
$104.16
B-Line B105ZN Eaton series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22, Electro-plated
Model: BLN-B105ZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22,...
B-LINE
$78.68
$38.57
B-Line B108ZN Eaton series strut fittings and accessories, 2.12" Height, 3.5" Length, 1.62" Width, .55lbs, Steel, Offset size 2-1/8 in, Two hole offset z support, Thickness 1/4 in, Electro-plated
Model: BLN-B108ZN
Eaton B-Line series strut fittings and accessories, 2.12" Height, 3.5" Length, 1.62" Width, .55lbs, Steel, Offset size 2-1/8 in, Two hole offset z support, Thickness 1/4 in, Electro-plated
B-LINE
$83.21
$44.36
B-Line B106-42ZN Eaton series strut fittings and accessories, 1" Height, 3.5" Length, 1.62" Width, .44lbs, Steel, Offset size 1 in, Two hole z-support, Thickness 1/4 in, Fits channel type B42, Electro-plated
Model: BLN-B106-42ZN
Eaton B-Line series strut fittings and accessories, 1" Height, 3.5" Length, 1.62" Width, .44lbs, Steel, Offset size 1 in, Two hole z-support, Thickness 1/4 in, Fits channel type B42, Electro-plated
B-LINE
$88.54
$52.09
Eaton B-Line series strut fittings and accessories, 3.5" Height, 3.5" Length, 1.62" Width, .70lbs, Steel, Offset size 3-1/2 in, Three hole z-support, Thickness 1/4 in, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 3.5 in
- Product Length Depth:
- 3.5 in
- Product Weight:
- .7 lb
- Product Width:
- 1.62 in
- Special Features:
- Offset size 3-1/2 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Three hole z-support
- Product Finish:
- Electro-plated
- Product Details:
- Three hole z-support
- Product Material:
- Steel
B-LINE B110ZN – Frequently Asked Questions
1) What is a B-Line B110ZN three hole Z-support used for?
The B110ZN is a Z-shaped steel bracket with three holes that offsets a strut channel or supported load away from a wall, ceiling, or another piece of strut. The offset is 3-1/2 inches, so it carries the run that far off the mounting surface, which is how you clear an obstruction, a beam flange, or another trade's pipe without rerouting. It is a bolt-on fitting, so it goes together with standard strut nuts and bolts rather than welding.
2) Is the B110ZN finish OK for a damp or outdoor location?
The B110ZN is electro-plated steel, which is a thin zinc plating suited to dry indoor service. For exterior, wash-down, or corrosive areas, specify a hot-dip galvanized or stainless fitting instead; electro-plated brackets will surface rust in those conditions.
3) How thick is the steel on the B110ZN Z-support?
Quarter inch steel. That is the plate thickness of the fitting, not a light formed gauge, which is what you want when the bracket is carrying an offset load in bending rather than just holding a conduit in place. Material is steel throughout.
4) Do I need hardware to mount a B-Line B110ZN, or is it included?
The B110ZN ships as the bracket only. Plan on strut nuts and bolts for the channel side and appropriate anchors or fasteners for the structure side, sized to the bracket's three holes. Order those separately with the fitting so the run is not held up on the job.
5) What is the exact part number to order this Eaton B-Line Z-support under?
Order it as B-Line B110ZN. The ZN suffix is the electro-plated version of the B110 three hole Z-support. That is the manufacturer part number to quote on a submittal or a purchase order.
How fast can I get the B-LINE B110ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B110ZN come with a warranty?
Absolutely. The B-LINE B110ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B110ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B110ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.