You may also like
B-Line B409-9ZN Eaton series strut fittings and accessories, 4.62" Height, 9" Length, 1.62" Width, 1.95lbs, Steel, Single channel bracket, Uniform load capacity 1280 lbs, Electro-plated zinc
Model: BLN-B409-9ZN
Eaton B-Line series strut fittings and accessories, 4.62" Height, 9" Length, 1.62" Width, 1.95lbs, Steel, Single channel bracket, Uniform load capacity 1280 lbs, Electro-plated zinc
B-LINE
$228.95
$212.04
B-Line B409-9SS6 Eaton series strut fittings and accessories, 4.62" Height, 9" Length, 1.62" Width, 1.95lbs, Steel, Single channel bracket, Uniform load capacity 1280 lbs, Stainless steel type 316
Model: BLN-B409-9SS6
Eaton B-Line series strut fittings and accessories, 4.62" Height, 9" Length, 1.62" Width, 1.95lbs, Steel, Single channel bracket, Uniform load capacity 1280 lbs, Stainless steel type 316
B-LINE
$1,078.83
B-Line B409-9SS4 Eaton series strut fittings and accessories, 4.62" Height, 9" Length, 1.62" Width, 1.95lbs, Steel, Single channel bracket, Uniform load capacity 1280 lbs, Stainless steel type 304
Model: BLN-B409-9SS4
Eaton B-Line series strut fittings and accessories, 4.62" Height, 9" Length, 1.62" Width, 1.95lbs, Steel, Single channel bracket, Uniform load capacity 1280 lbs, Stainless steel type 304
B-LINE
$615.74
B-Line B409-6HDG Eaton series strut fittings and accessories, 4.62" Height, 6" Length, 1.62" Width, 1.52lbs, Steel, Single channel bracket, Uniform load capacity 1920 lbs, Hot-dipped galvanized
Model: BLN-B409-6HDG
Eaton B-Line series strut fittings and accessories, 4.62" Height, 6" Length, 1.62" Width, 1.52lbs, Steel, Single channel bracket, Uniform load capacity 1920 lbs, Hot-dipped galvanized
B-LINE
$273.13
$264.61
B-Line B409-12HDG Eaton series strut fittings and accessories, 4.62" Height, 12" Length, 1.62" Width, 2.32lbs, Steel, Single channel bracket, Uniform load capacity 960 lbs, Hot-dipped galvanized
Model: BLN-B409-12HDG
Eaton B-Line series strut fittings and accessories, 4.62" Height, 12" Length, 1.62" Width, 2.32lbs, Steel, Single channel bracket, Uniform load capacity 960 lbs, Hot-dipped galvanized
B-LINE
$323.99
Eaton B-Line series strut fittings and accessories, 4.62" Height, 9" Length, 1.62" Width, 1.95lbs, Steel, Single channel bracket, Uniform load capacity 1280 lbs, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 4.62 in
- Product Length Depth:
- 9 in
- Product Weight:
- 1.95 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Single channel bracket
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Single channel bracket
- Product Material:
- Steel
- Product Length:
- 9 in
B-LINE B409-9HDG – Frequently Asked Questions
1) How much load will the B-Line B409-9HDG strut bracket carry?
The B409-9HDG single channel bracket is rated for a uniform load capacity of 1280 lbs. That is a uniform load figure, so a concentrated point load at the end of the 9 inch leg will not reach the same number. The bracket itself is steel and weighs 1.95 lb.
2) Can the B-Line B409-9HDG bracket be used outdoors or in a wet area?
Yes. The B409-9HDG is finished hot-dipped galvanized over steel, which is the finish specified for exterior, damp, and washdown locations where plain or electro-plated fittings would rust. Same part geometry as the plain-finish version, just the corrosion-resistant coating.
3) What are the dimensions of the B409-9HDG strut bracket?
It measures 9 in length/depth, 4.62 in height, and 1.62 in width. The 1.62 in dimension is the width of a standard 1-5/8 in strut channel profile, which is what the bracket is sized to sit against.
4) Does the B409-9HDG bracket come with bolts and channel nuts?
The B409-9HDG is the bracket only, 1.95 lb of galvanized steel. Hardware to fasten it to the channel (strut nuts and hex bolts) and the anchors for the structural side are ordered separately, so plan on matching hot-dipped galvanized fasteners if the run is outdoors.
5) What is a single channel bracket like the B409-9HDG actually used for?
It is a shelf-style support: one leg bolts to a wall, column, or vertical strut, and the 9 in leg carries a run of single strut channel out from that surface. Electricians use it to carry conduit racks, cable tray, and small equipment off a wall. If you need to support a double-channel (back-to-back) run, a single channel bracket is the wrong fitting.
6) Is B409-9HDG the correct Eaton part number to order?
Yes. B409-9HDG is the manufacturer part number for the Eaton B-Line series hot-dipped galvanized single channel bracket, 9 in. The HDG suffix is the finish designation; drop it and you are specifying a different finish of the same bracket.
How fast can I get the B-LINE B409-9HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B409-9HDG come with a warranty?
Absolutely. The B-LINE B409-9HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B409-9HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B409-9HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.