B-Line B297-18HDG Eaton series...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$922.00
Image coming soon

B-Line B297-18HDG Eaton series strut fittings and accessories, 6.25" Height, 18" Length, 1.62" Width, 6.68lbs, Steel, 2 mounting holes 9/16" diameter (vertical), Bracket, Uniform load capacity 1100 lb, Hot-dipped galvanized

(No reviews yet) Write a Review

Model: B297-18HDG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$922.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut fittings and accessories, 6.25" Height, 18" Length, 1.62" Width, 6.68lbs, Steel, 2 mounting holes 9/16" diameter (vertical), Bracket, Uniform load capacity 1100 lb, Hot-dipped galvanized

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Product Height:
6.25 in
Product Length Depth:
18 in
Product Weight:
6.68 lb
Product Width:
1.62 in
Special Features:
Number of mounting holes (1) 9/16 in diameter
Department:
Electrical
Product Group:
Mounting Hardware
Product Subgroup:
Brackets
Product Type:
Bracket
Product Finish:
Hot-dipped galvanized
Product Details:
Bracket
Product Material:
Steel

B-LINE B297-18HDG – Frequently Asked Questions

1) How much load will the B-Line B297-18HDG strut bracket carry?
The B297-18HDG carries a uniform load rating of 1100 lb. That is a uniform load figure, not a point load at the end of the arm, so spread the supported weight across the 18 inch length rather than hanging it all at the tip.
2) What bolt size do the mounting holes on the B297-18HDG bracket take?
Mounting holes are 9/16 in diameter, which is the standard strut fitting hole for 1/2 inch bolts or channel nuts. Hardware is not part of the bracket, so order the 1/2 inch channel nuts, bolts and washers separately to land it on the strut.
3) Is this B-Line bracket rated for outdoor or wet locations?
It is hot-dipped galvanized steel, which is the finish specified for exterior, rooftop and damp indoor runs. Plain or electro-zinc fittings are the indoor-only choice; the hot-dip coating here is what makes it suitable where weather or washdown hits the steel.
4) What are the actual dimensions of the B297-18HDG bracket?
It measures 6.25 x 18 x 1.62 inches (height, length, width) and weighs 6.68 lb. The 1.62 inch width matches standard 1-5/8 inch strut channel, so it sits flush on a 1-5/8 channel face without overhang.
5) How many bolts hold this strut bracket on, and how do I orient it?
Two 9/16 in mounting holes, arranged vertically, fasten the B297-18HDG back to the channel. That vertical two-hole pattern is what resists the rolling moment of an 18 inch arm, so mount it to a vertical strut run with the holes stacked as intended rather than rotating it onto a horizontal member.
6) What do I order the B-Line B297-18HDG by?
Order it by B-Line part number B297-18HDG. The B297 is the bracket series, 18 gives the arm length in inches, and HDG designates the hot-dipped galvanized finish.
7) What is this 18 inch B-Line bracket used for on an electrical job?
It is a strut fitting bracket used to cantilever an 18 inch support arm off a channel run, typically to carry conduit racks, cable tray, light fixtures or equipment away from a wall or column. Steel construction, 1100 lb uniform load, galvanized for exterior duty.
How fast can I get the B-LINE B297-18HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B297-18HDG come with a warranty?
Absolutely. The B-LINE B297-18HDG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B297-18HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B297-18HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!