B-Line B297-30HDG Eaton series...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,282.70
Image coming soon

B-Line B297-30HDG Eaton series strut fittings and accessories, 6.25" Height, 30" Length, 1.62" Width, 10.40lbs, Steel, Number of mounting holes (2) 9/16 in diameter (vertical), Bracket, Uniform load capacity 665 lb, Hot-dipped galvanized

(No reviews yet) Write a Review

Model: B297-30HDG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,282.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut fittings and accessories, 6.25" Height, 30" Length, 1.62" Width, 10.40lbs, Steel, Number of mounting holes (2) 9/16 in diameter (vertical), Bracket, Uniform load capacity 665 lb, Hot-dipped galvanized

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Product Height:
6.25 in
Product Length Depth:
30 in
Product Weight:
10.4 lb
Product Width:
1.62 in
Special Features:
Number of mounting holes (1) 9/16 in diameter
Department:
Electrical
Product Group:
Mounting Hardware
Product Subgroup:
Brackets
Product Type:
Bracket
Product Finish:
Hot-dipped galvanized
Product Details:
Bracket
Product Material:
Steel
Product Length:
30 in

B-LINE B297-30HDG – Frequently Asked Questions

1) How much load will the B-Line B297-30HDG strut bracket carry?
Uniform load capacity on the B297-30HDG is 665 lb. That is the figure to design to when you are hanging conduit runs, cable tray, or equipment off the bracket, and it assumes the load is spread across the bracket rather than concentrated at the free end.
2) Can this B-Line bracket be used outdoors or in a wet area?
Yes. The B297-30HDG is steel with a hot-dipped galvanized finish, which is the coating B-Line specifies for exterior, damp, and corrosive service. Plain electro-galvanized or painted strut fittings are the indoor-only option; hot-dip is what you want on a rooftop, in a parking structure, or in a wash-down area.
3) What size anchors or bolts do the mounting holes on the B297-30HDG take?
The mounting holes are 9/16 in diameter, which is sized for 1/2 in hardware, the standard strut fastener size. Plan on 1/2 in bolts, wedge anchors, or through-bolts with washers; hardware is not supplied with the bracket.
4) How long is the B297-30HDG bracket and how far will it stand a run off the wall?
It measures 30 in in length, 6.25 in in height, and 1.62 in in width. The 30 in dimension is what gives you the standoff or span for the pipe or tray you are supporting, and the 1.62 in width matches standard 1-5/8 in strut profiles so it sits flush against a channel face.
5) Is the B297-30HDG bracket a listed or certified product I can cite on a submittal?
No listing or certification applies to the B297-30HDG, so treat it as a structural steel strut fitting rather than a listed electrical component. What you can put on a submittal is the hard data: steel construction, hot-dipped galvanized finish, 665 lb uniform load capacity, and 9/16 in mounting holes.
6) How much does the B297-30HDG weigh, and does it need two people to set?
Each bracket weighs 10.4 lb. One electrician can handle it on a ladder, but at 30 in long it is awkward enough overhead that most crews tack it with one fastener first, then level and finish. Remember to add the bracket weight to your total when you are checking anchor capacity in the deck or wall.
7) Is B297-30HDG a single part number or do I have to pick a size and finish?
It is one configuration. B297-30HDG is the 30 in hot-dipped galvanized version of the B297 bracket, so there is nothing further to specify on the order beyond quantity. The length and finish are baked into the part number, which makes it straightforward to standardize across a facility or repeat on a second phase of a job.
How fast can I get the B-LINE B297-30HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B297-30HDG come with a warranty?
Absolutely. The B-LINE B297-30HDG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B297-30HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B297-30HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!