Eaton B-Line series strut fittings and accessories, 6.25" Height, 24" Length, 1.62" Width, 8.57lbs, Steel, Number of mounting holes (2) 9/16 in diameter (vertical), Bracket, Uniform load capacity 835 lb, Stainless steel type 304
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 6.25 in
- Product Length Depth:
- 24 in
- Product Weight:
- 8.57 lb
- Product Width:
- 1.62 in
- Special Features:
- Number of mounting holes (1) 9/16 in diameter
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Bracket
- Product Finish:
- Stainless steel type 304
- Product Details:
- Bracket
- Product Material:
- Steel
- Product Length:
- 24 in
B-LINE B297-24SS4 – Frequently Asked Questions
1) How much load will the B-Line B297-24SS4 strut bracket carry?
The B297-24SS4 is rated for a uniform load capacity of 835 lb. That is a uniform rating, so a point load concentrated at the free end of the 24 inch arm should be treated more conservatively than the published figure.
2) Is the B-Line B297-24SS4 bracket suitable for outdoor or washdown areas?
It is a type 304 stainless steel bracket, which is what you want for exterior runs, damp mechanical rooms, food processing and washdown environments where a plain or electro-galvanized fitting would rust out. For heavy chloride exposure such as coastal or pool chemical areas, 316 stainless is the usual step up.
3) What size anchors or bolts fit the mounting holes on the B297-24SS4 bracket?
The mounting holes are 9/16 inch in diameter, which takes 1/2 inch hardware, the standard strut bolt size. Match your anchor material to the bracket: with 304 stainless, use stainless fasteners rather than plated steel so you are not setting up galvanic corrosion in a wet location.
4) How far off the wall does the B-Line B297-24SS4 bracket project?
It runs 24 inches in length, so it gives you a 24 inch cantilever off the mounting surface, standing 6.25 inches high and 1.62 inches wide. Check the 24 inch projection against your aisle or clearance dimension before you set the run, since that reach is fixed.
5) Is the B297-24SS4 bracket a one-person install overhead?
It weighs 8.57 lb, light enough for one person to hold in place while starting the fasteners, though on overhead work at 24 inches of reach most crews still set it with a helper or a temporary support.
How fast can I get the B-LINE B297-24SS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B297-24SS4 come with a warranty?
Absolutely. The B-LINE B297-24SS4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B297-24SS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B297-24SS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.