B-Line Eaton series strut fittings and accessories, 6.43" Height, 24" Length, 1.62" Width, 3.7lbs, Steel, Right bracing slotted bracket, Thickness 1/4

The B-Line B174SHRGRN bracing bracket runs 24 inches long, 6.43 inches high and 1.62 inches wide, and weighs 3.7 pounds. That 24 inch reach is what lets it pick up a diagonal run back to a wall or deck without adding a separate strut length, and the 3.7 pound weight means one person can set it overhead on a lift.

Six holes total: one 7/16 inch diameter round hole, and four slots measuring 1 inch long by 13/32 inch. The 7/16 inch hole takes a 3/8 inch bolt, which is the standard strut channel hardware size, and the 1 inch slots give you adjustment along the run so you can set the diagonal angle on site instead of drilling in the field.

The B174SHRGRN ships in Eaton B-Line's DURA GREEN finish, a coated steel finish rather than bare or plain mill steel. Match it to the rest of your strut run: if the channel and other fittings on the job are DURA GREEN, this bracket keeps the assembly consistent. If your other fittings are electro-galvanized or hot dip, order the matching finish version of the fitting instead so you are not mixing coatings in one bolted joint.

No hardware is included. The B174SHRGRN is the bracket alone, 3.7 pounds of 1/4 inch steel with a six hole pattern. Order strut nuts and 3/8 inch bolts separately, sized to the channel you are bracing into, and count one set per hole you intend to use.

No listing applies to this part. Eaton B-Line records certifications as Not Applicable for the B174SHRGRN bracing bracket, which is normal for a structural strut fitting since it is the overall supporting assembly, not the individual bracket, that gets engineered and signed off for a given load.