Eaton B-Line series strut fittings and accessories, Designed for supporting pipe from walls, 800 Lb load cap, Stainless steel, Adjustable strut bracket, Zinc
Manufacturer Resources
Product Specs
- Application:
- Designed for supporting pipe from walls
- Certifications:
- Not Applicable
- Load Capacity:
- 800 lbs
- Product Height:
- 21 in
- Product Length Depth:
- 18 in
- Product Weight:
- 10.04 lb
- Product Width:
- 2 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Adjustable strut bracket
- Product Details:
- Adjustable strut bracket
- Product Material:
- Steel
B-LINE B3064-2ZN – Frequently Asked Questions
1) How much weight will the B-Line B3064-2ZN strut bracket hold?
The B3064-2ZN adjustable strut bracket is rated at 800 lbs load capacity. That is the bracket rating itself, so your anchors into the wall and the fasteners tying the strut to the bracket have to be sized to carry at least as much for the rating to mean anything on the job.
2) What size is the B3064-2ZN bracket, and how far off the wall will it carry pipe?
Dimensions on the B3064-2ZN are 21 x 18 x 2 inches, with the 2 inch figure matching standard strut width. The 18 inch figure is the length/depth dimension, so that is the arm reach available for standing pipe off a wall. It weighs 10.04 lbs, which matters if you are hanging several of them overhead on a run.
3) Does the B3064-2ZN come with the pipe clamps and anchors I need?
No. The B3064-2ZN is the bracket only. You order the pipe straps or clamps sized to your pipe, the strut nuts and bolts for attaching to the arm, and wall anchors suited to your substrate (concrete, block, or steel) separately.
4) What is this Eaton B-Line bracket actually used for?
It is built for supporting pipe off a wall. You anchor the bracket to the wall and run pipe on the arm, with the adjustable design letting you set the angle or position rather than being locked to one fixed geometry. Common on mechanical, plumbing, and electrical conduit runs where the pipe has to stand clear of the wall face.
5) Is the B3064-2ZN steel or stainless, and is the zinc finish OK outdoors?
Material of record on the B3064-2ZN is steel with a zinc finish. Electroplated zinc is an indoor/dry-location finish, so for exterior, wash-down, or corrosive environments you want a hot-dip galvanized or stainless strut fitting instead of the ZN version.
6) What part number do I order for this B-Line wall pipe bracket?
Order it as Eaton B-Line B3064-2ZN. The -2 designates the 2 inch strut width and ZN is the zinc finish, so if you are matching an existing run of hardware, confirm both before you place the order.
How fast can I get the B-LINE B3064-2ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3064-2ZN come with a warranty?
Absolutely. The B-LINE B3064-2ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3064-2ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3064-2ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.