B-Line Eaton series strut pipe...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,973.74

B-Line Eaton series strut pipe clamps and accessories, .06" height, 2.279" length, 1.25" width, 400 lbs, Steel, Safety factor of 5, Include combinatio

(No reviews yet) Write a Review

Model: B2027YZN
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,973.74
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Eaton B-Line series strut pipe clamps and accessories, .06" height, 2.279" length, 1.25" width, 400 lbs, Steel, Safety factor of 5, Include combination recess, O.D pipe conduit clamp, Yellow zinc chromate, 1/4"-20

Manufacturer Resources

Product Specs

Bolt Pin Size:
1/4"-20
Certifications:
Not Applicable
Load Capacity:
400 lbs
Product Height:
.06 in
Product Length Depth:
2.279 in
Product Weight:
.1 lb
Product Width:
1.25 in
Special Features:
Safety factor of 5 Include combination recess
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Conduit Accessories
Product Type:
O.D pipe conduit clamp
Product Details:
O.D pipe conduit clamp
Product Material:
Steel

B-LINE B2027YZN – Frequently Asked Questions

1) How much weight can the Eaton B-Line B2027YZN strut pipe clamp hold?
The B2027YZN strut clamp is rated at 400 lbs load capacity with a safety factor of 5 built into that number. That covers typical conduit and small-diameter pipe runs on strut. For heavier trapeze loads, step up to a larger clamp or add support points rather than pushing a single clamp past its rating.
2) What bolt size does the B-Line B2027YZN pipe clamp take?
It uses a 1/4-20 bolt. Pair it with a 1/4-20 strut nut and hardware of the same thread when mounting to channel. The clamp body itself is the O.D. pipe conduit clamp; the bolt and channel nut are separate items on most strut jobs.
3) Is the B2027YZN a conduit clamp or a pipe clamp?
Both. It is a steel O.D. pipe and conduit clamp for strut channel, so it works on EMT, rigid conduit, or small pipe as long as the actual outside diameter matches the clamp size. Size by measured O.D., not by trade size, because EMT and rigid of the same trade size have different outside diameters.
4) Is the yellow zinc chromate finish on this B-Line strut clamp OK for outdoor or wet locations?
Yellow zinc chromate is a plated finish intended for dry indoor service. It gives light corrosion resistance for interior mechanical rooms and ceiling spaces, not for exterior, coastal, or washdown areas. For those, specify an electrogalvanized-heavy, hot dip galvanized, or stainless version of the clamp instead.
5) What are the dimensions of the B2027YZN clamp?
Stated dimensions are .06 in height, 2.279 in length/depth, and 1.25 in width, and it weighs .1 lb. That width matters on strut: at 1.25 in it sits within the face of standard 1-5/8 in channel, so clamps can be run side by side along a strut without overhang.
6) What part number should I order to match existing B-Line strut clamps in my building?
The model is B2027YZN from Eaton's B-Line series, the yellow zinc chromate steel version. If the clamps already installed carry that same number stamped or tagged, this is a direct match for standardizing a facility on one clamp and one 1/4-20 bolt size.
7) What does the combination recess on the B-Line B2027YZN clamp do?
The combination recess is a formed seat in the clamp strap that grips the pipe or conduit O.D. and helps hold it from sliding along the run while the bolt is tightened. It is why this is sized by outside diameter rather than by trade pipe size.
How fast can I get the B-LINE B2027YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2027YZN come with a warranty?
Absolutely. The B-LINE B2027YZN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2027YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2027YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.