B-Line Eaton series strut pipe...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,445.61
B-Line Eaton series strut pipe clamps and accessories, .0625" height, 2.279" length, 1.25" width, 400 lbs, Stainless steel, Safety factor of 5, Includ

B-Line Eaton series strut pipe clamps and accessories, .0625" height, 2.279" length, 1.25" width, 400 lbs, Stainless steel, Safety factor of 5, Includ

(No reviews yet) Write a Review

Model: B2027ZN
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,445.61
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut pipe clamps and accessories, .0625" height, 2.279" length, 1.25" width, 400 lbs, Stainless steel, Safety factor of 5, Include combination recess, O.D pipe conduit clamp, Electro-plated zinc, 1/4 -20

Manufacturer Resources

Product Specs

Bolt Pin Size:
1/4"-20
Certifications:
Not Applicable
Load Capacity:
400 lbs
Product Height:
.0625 in
Product Length Depth:
2.279 in
Product Weight:
.1 lb
Product Width:
1.25 in
Special Features:
Safety factor of 5 Include combination recess
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Conduit Accessories
Product Type:
O.D pipe conduit clamp
Product Details:
O.D pipe conduit clamp
Product Material:
Stainless steel

B-LINE B2027ZN – Frequently Asked Questions

1) How much load will the B-Line B2027ZN strut pipe clamp hold?
The B2027ZN carries a 400 lb load rating with a safety factor of 5 built into that figure. That is the clamp itself; your actual capacity on the job is also governed by the strut, the anchors, and the spacing of your supports, so size the whole assembly rather than the clamp alone.
2) Is the B-Line B2027ZN clamp sized by pipe O.D. or by nominal trade size?
It is an O.D. pipe conduit clamp, meaning it is selected to the outside diameter of the pipe or conduit, not the nominal trade size. Measure the actual O.D. of the run you are supporting and match the clamp to that number, otherwise you will end up with a strap that either won't close or won't grip.
3) Will a zinc plated clamp hold up outdoors or in a wet area?
The B2027ZN is stainless steel with an electro-plated zinc finish. Electro-plated zinc is a light coating suited to dry indoor and protected locations. For exterior, washdown, coastal, or corrosive process areas, specify a hot-dip galvanized or bare stainless clamp instead.
4) What does the combination recess on this B-Line clamp do?
The B2027ZN includes a combination recess, which seats the clamp into the strut channel lip so it locates itself before you torque the bolt down. One hand holds the pipe, the other runs the bolt, which is the difference between a one-man install and a two-man install on an overhead run.
5) Can I use the B2027ZN to support EMT and rigid conduit on a strut rack?
Yes. It is an O.D. pipe conduit clamp intended for mounting conduit and pipe to strut, and it is catalogued for electrical work. Match it to the outside diameter of the EMT or rigid you are running, and use a 1/4-20 bolt and strut nut at each support point.
6) What are the dimensions of the B-Line B2027ZN strut clamp?
It measures 2.279 x 1.25 x .0625 inches and weighs .1 lb. The .0625 in figure is the strap thickness, so it sits nearly flush against the strut face and won't eat into clearance in a tight ceiling space or behind equipment.
7) What part number do I order for this B-Line strut pipe clamp?
Order Eaton B-Line part number B2027ZN. The ZN suffix is the electro-plated zinc finish.
How fast can I get the B-LINE B2027ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2027ZN come with a warranty?
Absolutely. The B-LINE B2027ZN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2027ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2027ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!