Eaton B-Line series strut pipe clamps and accessories, .0677" height, 2.705" length, 1.25" width, 600 lbs, Steel, Pre-assembled combination recess square nut, Yellow zinc chromate, 1/4 -20
Manufacturer Resources
Product Specs
- Bolt Pin Size:
- 1/4"-20
- Certifications:
- Not Applicable
- Load Capacity:
- 600 lbs
- Product Height:
- .0677 in
- Product Length Depth:
- 2.705 in
- Product Weight:
- .15 lb
- Product Width:
- 1.25 in
- Special Features:
- Pre-assembled combination recess square nut
- Department:
- Electrical
- Product Material:
- Steel
- Product Length:
- 2.705 in
- Product Length:
- 2.705 in
B-LINE B2030YZN – Frequently Asked Questions
1) What size bolt does the B-Line B2030YZN strut nut take?
The B2030YZN is a 1/4-20 strut nut, so it threads onto standard 1/4-20 bolts or all-thread. If your hangers or clamps are running 3/8-16 or 1/2-13 rod, this is the wrong thread size and you need the matching nut for that diameter.
2) Does the B-Line B2030YZN come with the spring already attached, or do I assemble it?
It ships as a pre-assembled combination recess square nut, so the nut and spring come as one piece. You drop it into the channel, quarter-turn it, and the spring holds it in position while you start the bolt. That is the difference between this and a plain square nut you have to hold in place by hand overhead.
3) Is the yellow zinc finish on the B2030YZN strut nut suitable for outdoor or damp locations?
The B2030YZN is steel with a yellow zinc chromate finish. That is a plated indoor and protected-area finish, fine for mechanical rooms, ceilings, and interior racks. For sustained outdoor exposure, wet process areas, or corrosive environments, specify a hot dip galvanized or stainless strut nut instead.
4) Do I need to order bolts separately with the B2030YZN channel nut?
Yes. The B2030YZN is the nut and spring assembly only. You supply the 1/4-20 hex head bolts or threaded rod, plus any washers, pipe clamps, or straps the run calls for.
5) Is the B-Line B2030YZN the same part as an Eaton B2030YZN?
Same part. B-Line is Eaton's strut and support line, and the manufacturer part number is B2030YZN either way. If a drawing or submittal calls out Eaton B-Line B2030YZN, this is it.
6) What are the actual dimensions of the B-Line B2030YZN strut nut?
It measures .0677 in height, 2.705 in length, and 1.25 in width, and weighs .15 lb. The 1.25 in width is the number that matters most: it is sized to seat inside standard 1-5/8 in strut channel lips.
How fast can I get the B-LINE B2030YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2030YZN come with a warranty?
Absolutely. The B-LINE B2030YZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2030YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2030YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.