Eaton B-Line series strut pipe clamps and accessories, .0966" height, 4.164" length, 1.25" width, 800 lbs, Steel, Pre-assembled combination recess hex head screw, Yellow zinc chromate
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Load Capacity:
- 800 lbs
- Product Height:
- .0966 in
- Product Length Depth:
- 4.164 in
- Product Weight:
- .33 lb
- Product Width:
- 1.25 in
- Special Features:
- Pre-assembled combination recess hex head screw
- Department:
- Electrical
- Product Material:
- Steel
B-LINE B2006PAYZN – Frequently Asked Questions
1) How much weight will the B-Line B2006PAYZN strut pipe clamp hold?
The B2006PAYZN pipe clamp is rated at 800 lbs load capacity. That is the clamp itself; the strut channel, the anchors into the structure, and the spacing of your supports all have their own limits, so the weakest element in the run governs what you can actually hang.
2) Does the B-Line B2006PAYZN strut clamp come with the screw, or do I order hardware separately?
The fastener ships attached. The clamp comes with a pre-assembled combination recess hex head screw, so the installer can drive it with either a hex driver or a recess bit, and there is no separate nut or bolt kit to chase. All you supply is the strut channel and whatever channel nut your strut system uses.
3) Is the B-Line B2006PAYZN pipe clamp suitable for a damp or outdoor install?
It is steel with a yellow zinc chromate finish. That plating gives ordinary indoor and sheltered corrosion protection, not the kind of coating you would spec for direct weather exposure, wash-down areas, or corrosive atmospheres. For those, look at a stainless or hot dip galvanized clamp instead.
4) What size is the B-Line B2006PAYZN clamp, and will it fit in a tight ceiling space?
Stated dimensions are .0966 in height, 4.164 in length/depth, and 1.25 in width, and the piece weighs .33 lb. The 1.25 in width is what matters if you are spacing multiple clamps along a single run of strut: that is the minimum footprint each clamp takes up on the channel.
5) Do I need to order a channel nut separately for the B2006PAYZN clamp?
The screw comes pre-assembled to the clamp, but it still has to land in something inside the strut. Order the channel nut or spring nut that matches your strut series along with the clamps. The clamp itself supplies only the body and the combination recess hex head screw.
6) What is this B-Line clamp actually used for on an electrical job?
It is a strut-mounted pipe clamp, part of the Eaton B-Line strut system. It secures conduit or pipe to a run of strut channel on a wall, ceiling, or rack. The pre-assembled screw means one hand holds the pipe and the other drives the fastener, which is the practical difference on overhead work.
How fast can I get the B-LINE B2006PAYZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2006PAYZN come with a warranty?
Absolutely. The B-LINE B2006PAYZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2006PAYZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2006PAYZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.