B-Line B2014PASS6 Eaton series strut pipe clamps and accessories, .104" height, 5.039" length, 1.25" width, Steel, Pre-assembled combination recess hex head screw, Pipe or conduit clamps, Stainless steel type 316

The material listed for the B2014PASS6 is steel, and the part is described as stainless steel type 316. Type 316 is the marine and chemical grade stainless, so it is the one specified where chlorides, coastal air, wastewater or washdown chemicals attack plated carbon steel hardware. If your run is indoors and dry, a plated carbon steel clamp is the cheaper choice.

Hardware comes with it. The B2014PASS6 ships as a pre-assembled unit with a combination recess hex head screw already fitted, so an installer can pull it out of the box and set it on the strut without hunting for loose fasteners. You still need the strut channel and, depending on how you mount it, a channel nut.

Dimensions given for the B2014PASS6 are .104 inch height, 5.039 inch length and 1.25 inch width. The 1.25 inch width sits inside the 1-5/8 inch opening of standard strut channel, which is what these clamps are made to mount to. Weight is .38 lb per piece.

Order it as B-Line B2014PASS6. It is part of the Eaton B-Line series of strut pipe clamps and accessories, and that manufacturer number is the single identifier to quote.

It works for either. The B2014PASS6 is a pipe or conduit clamp, so it is used to strap rigid conduit, EMT or pipe to strut channel. The 316 stainless construction is why it turns up on mechanical and process piping as often as on electrical runs.

Pricing and ordering are per clamp, with a stated weight of .38 lb each. For a strut-mounted run, count one clamp per support point and add a channel nut where your strut and mounting method call for one.