You may also like
Eaton B-Line series strut pipe clamps and accessories
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .094 IN
- Product Length Depth:
- .31 IN
- Product Weight:
- .042 LB
- Product Width:
- 1.62 IN
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Tubing clamp
- Product Details:
- Tubing clamp
- Product Material:
- Steel
B-LINE B2085ZN – Frequently Asked Questions
1) What size is the B-Line B2085ZN tubing clamp?
Published dimensions for the B2085ZN are 1.62 in width, .31 in length/depth and .094 in height, and it weighs .042 lb. That .094 in figure is the stock thickness of the steel, so it sits nearly flush where it clamps down.
2) Will the B2085ZN work as a general purpose pipe clamp on strut?
It is catalogued specifically as a tubing clamp within the Eaton B-Line strut pipe clamp and accessory range, so it is sized for tubing, not full-size pipe. At 1.62 in wide and .31 in deep it is a small-diameter part. For larger pipe on strut, go to a B-Line strut pipe clamp sized to the pipe OD instead.
3) What is the B-Line B2085ZN and what is it used for?
The B2085ZN is a steel tubing clamp from the Eaton B-Line strut pipe clamp and accessory line. It secures tubing against strut channel as part of a supported run. Material is steel, and the single orderable model is part number B2085ZN.
4) Is the B2085ZN clamp steel or plastic?
Steel. It is a steel tubing clamp, so it holds up to handling on a commercial job better than a nylon or cushioned clip, and it will not creep under load the way plastic can in a hot mechanical room.
5) Does the B-Line B2085ZN carry a UL listing or other certification?
Certification data for the B2085ZN tubing clamp is recorded as Not Applicable, so treat it as an unlisted mechanical support component rather than a listed electrical device. If your submittal calls for a listed support, specify the clamp by the engineer's stated requirement.
6) How many part numbers does the B-Line B2085ZN come in, and what do I order?
One. B2085ZN is the single model, ordered as that exact part number, with no finish or size choices to specify. Since tubing clamps go in by the dozen on a run, work out your quantity off the support spacing before you place the order.
How fast can I get the B-LINE B2085ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2085ZN come with a warranty?
Absolutely. The B-LINE B2085ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2085ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2085ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.