B-Line Eaton series Type 1 junction boxes, 24" height, 12" length, 24" width, 1, Screw cover, SCGV NK enclosure, Surface mounted, Medium single door,

No. It is a NEMA Type 1 enclosure, which means indoor use only, for protection against dust and incidental contact with the enclosed equipment. It offers no rated protection against rain, hose-down, or corrosive environments. For a wet or exterior location you need a NEMA 3R, 4, or 4X box instead.

24 inches high, 24 inches wide, and 12 inches deep. That 12 inch depth is what matters most for conductor bending space and for how far it projects off the wall once surface mounted.

No knockouts. The 242412 SCGV NK is supplied blank, so you punch or drill your own conduit entries wherever the run lands. That is the point of the NK designation, and it suits field-routed work where you do not want to plug factory holes. If you want pre-punched entries, order a knockout version of the same box.

It surface mounts through thru holes in the back of the enclosure, so it bolts flat to a wall, a backboard, or a strut rack. It is not a flush or recessed box. At 43.9 lb empty, anchor into structure or blocking rather than drywall alone.

Yes, it carries UL 50 certification, the standard for enclosures for electrical equipment, and it is rated NEMA Type 1. That is the pairing most inspectors and institutional spec writers look for on an indoor pull box.

The cover is a screw cover with keyhole slots, so you can back the plated screws out part way and lift the cover off the slots without removing them entirely, then hang it back on one-handed. Full box weight is 43.9 lb, so plan on a second set of hands or a lift for mounting the enclosure itself even though cover removal is a one-man job.

A screw cover box like the 242412 SCGV NK is meant for pull and junction duty, splices, taps, and terminations you open rarely. Every service call means backing out screws. If the box will be opened routinely for adjustment, metering, or control work, a hinged door enclosure is the better pick. The keyhole slots and plated screws here make the occasional opening quicker than a plain screw cover.

14 gauge galvanized steel throughout. The finish is unfinished galvanized, grey in appearance, so no paint is required for an indoor dry location. If you want it to match painted gear on the wall, it will take field paint, but the galvanizing is the corrosion protection as supplied.

Eaton B-Line 242412 SCGV NK. The number reads as its own spec sheet: 24 high, 24 wide, 12 deep, screw cover galvanized, no knockout.

Country of origin is the US, which matters on federally funded and many state or municipal jobs with domestic sourcing requirements. Pair that with the UL 50 listing when you submit it.