B-Line Eaton series Type 1 junction boxes, 8" height, 8" length, 8" width, 1, Screw cover, SC enclosure, Surface mounted, Small single door, 4 side k

No. The 888 SC is a NEMA Type 1 enclosure, which is indoor-only protection against falling dirt and incidental contact. It has no gasket and no watertight rating, so keep it out of wet locations, exterior walls, washdown areas, and anywhere it can be hosed or rained on. For those spots you need a Type 3R, 4, or 4X enclosure instead.

It measures 8 x 8 x 8 inches (height, width, and length/depth all 8 inches), so it is a cube. That gives you the same clearance in every direction for conductor bending space, and it will sit in an 8 inch stud bay layout without overhang since it surface mounts on the face of the wall.

Twelve knockouts total: 4 on the sides, 4 on the top, and 4 on the bottom. That lets you bring conduit in from either side or run straight through top to bottom without drilling. The cover itself is clear of knockouts.

It carries UL 50, the standard for enclosures for electrical equipment, and is a NEMA Type 1 indoor enclosure. For an inspector on a commercial or institutional job, that plus the 16 gauge steel construction is what gets cited on a Type 1 pull box.

Screw cover. The 888 SC cover fastens with plated screws and has keyhole slots so you can back the screws out part way and lift the cover off without losing them. It is meant for pull and splice points you rarely open. If you need frequent access to devices inside, choose a hinged-door enclosure instead of an SC box.

It surface mounts through holes formed in the back of the box, so you fasten it directly to the wall or a strut run with your own anchors or screws sized to the substrate. No separate mounting bracket or panel kit is part of the box. At 6.8 lb empty, standard wall anchors into masonry or screws into blocking will carry it once conduit is landed.

16 gauge carbon steel, painted ANSI 61 grey. That is the standard grey used across most industrial control enclosures, so it will match existing panels and gutter in a plant or mechanical room. Painted steel is for dry interior use only; it is not a stainless or a coated corrosion-resistant box.

Order Eaton B-Line part number 888 SC. The number reads as the three dimensions (8 x 8 x 8) followed by SC for screw cover, which is how the whole B-Line SC series is numbered. Country of origin is the US.

Yes, and it is a common choice for that. The 888 SC is a single size (8 x 8 x 8) NEMA 1 screw cover box in ANSI 61 grey, so ordering it repeatedly keeps one cover screw type, one finish, and one knockout layout across every interior pull point in the building. B-Line makes the same SC style in other cube and rectangular sizes if you need a larger box on the same series.