B-Line Eaton series Type 3/3R junction boxes, 10" height, 6" length, 10" width, 3R, Screw cover, RTSCGV enclosure, Surface mounted, Small single door

Yes. The Eaton B-Line 10106 RTSCGV is a NEMA Type 3R enclosure, which means it is built for outdoor use against rain, sleet and snow, and it includes a rainhood over the cover. It is galvanized steel, unfinished, and UL 50 listed. Note that 3R protects against falling water, not hose-directed water or dust, so for washdown or heavy dust areas you need a Type 4 or 12 box instead.

It measures 10 inches high, 10 inches wide and 6 inches deep, and weighs 7.8 lb. That 6 inch depth is what gives you room for splices, small terminal blocks or a compact contactor behind the screw cover.

Five knockouts are provided in the bottom of the box only. The top, sides and back are solid, which is deliberate on a 3R enclosure since bottom entry keeps water out. If you need side or top entry you will have to punch it yourself and use a raintight hub fitting to keep the 3R rating intact.

It is a surface-mount enclosure with embossed thru holes in the back panel, so you fasten it straight to the wall or to Unistrut through those provisions. The embossed holes stand the box off the mounting surface slightly, which matters outdoors because it keeps water from sitting behind the back. At 7.8 lb you can hang it with standard anchors for the wall type.

It is a screw cover, not a hinged door. You back out the plated screws and lift the cover clear, so plan for a hand free to hold it when you are working on a wall or a pole. If a technician needs frequent access without loose hardware, look at a hinged-cover 3R enclosure instead.

The body is 16 gauge galvanized steel. That is a rigid commercial-duty wall, not a thin residential box, so it takes conduit runs and mounted components without oil-canning. The galvanized surface is left unfinished, grey in appearance, so it can be field painted if you need it to blend with a facade.

It carries UL 50, the standard covering enclosures for electrical equipment, and the country of origin is the US. For a spec that calls out a UL 50 listed NEMA 3R galvanized enclosure, this one meets that line as written.

Order Eaton B-Line model 10106 RTSCGV. The number reads out of the dimensions: 10 high, 10 wide, 6 deep, with RTSCGV designating the raintight screw cover galvanized enclosure. Quote that full string with the space before RTSCGV so it is not confused with a painted or hinged variant.